Netflow: Cannot generate the report '__startdate__' to '__enddate__' with the filter '__filter__' . Error '__error__' Cannot complete the operation with template '__os__' of the server '__serverinfo__': server response timeout exceeded Cannot complete the operation with template '__os__' of the server '__serverinfo__': server response timeout exceeded 10 minutes (the 'CheckSendByte' option) Netflow: report '__startdate__' to '__enddate__' with the file '__filter__' is ready for export Cannot complete the operation with template '__os__' of the server '__serverinfo__': terminated by user Operation with the template '__os__' of the server '__serverinfo__' completed successfully Server '__serverinfo__' can be accessed via SSH, '__ip__' Server '__serverinfo__' can be accessed via VNC, '__ip__' Server search: __count__ servers found <a href="https://doc.ispsystem.com/index.php/VPU_mode" target="_blank">VPU module</a> Default 102-105, 2000-2500 Type of IPMI IP addresses 121 vpu 'VPU' module settings VpuIpmi 121 VLAN networks provisioned for IPMI will contain IP addresses of this type. It is needed for automatic IPMI setup when assigning an IP address from VPU to the server VPU VLAN networks provisioned for IPMI will contain IP addresses of this type. It is needed for automatic IPMI setup when assigning an IP address from VPU to the server 'VPU' module settings public vpu_ipmi Pool of IPMI IP addresses IP address IPMI which received address from VPU network List of IPMI devices IPMI Cannot install DCImini on location id '__id__' Cannot install DCImini Cannot update DCImini Cannot update DCImini on location id '__id__' '__value__' file is missing statistics <a href="https://doc.ispsystem.com/index.php/Triggers" target="_blank">Trigger notifications</a> <a href="https://doc.ispsystem.com/index.php/IPMI_Proxy" target="_blank">IPMI proxy via ihttpd</a> <a href="https://doc.ispsystem.com/index.php/IPMI_console_module" target="_blank">IPMI сonsole</a> <a href="https://doc.ispsystem.com/index.php/Found_servers" target="_blank">Server search</a> <a href="https://doc.ispsystem.com/index.php/IPMI_Proxy_v2" target="_blank">IPMI proxy via auxiliary server</a> <a href="https://doc.ispsystem.com/index.php/Netwflow" target="_blank">NetFlow</a> Select a report format HTML CSV Output format 212.109.222.30 Fill out this field to generate a report for a certain source port. Leaving the field blank will show statistics for all the incoming addresses NetFlow statistics report Fill out this field to generate a report for a certain source port Source IP address Fill out this field to generate a report for a certain destination port. Leaving the field blank will show statistics for all the incoming addresses Fill out this field to generate a report for a certain destination port 80.87.203.12 Destination IP address Destination port Source port 80 443 Select this check box if you want to be informed when the NetFlow is generated Inform when the report is ready After processing the data, NetFlow files will be copied into the specified directory. It allows to generate NetFlow statistics reports in DCImanager interface. Leaving the field blank will hide the 'NetFlow reports' section. Data from this directory won't be deleted automatically. Path to copy files NetFlow module settings /var/netflow NetFlow/IPFIX statics collection policy. If you choose to collect statistics 'Only for the selected servers', open the server edit form and select a statistics collection method <a href="https://doc.ispsystem.com/index.php/Netwflow" target="_blank">NetFlow</a> NetFlow module settings Use NetFlow/IPFIX for statistics collection Destination port '__dst_port__' Source port '__src_port__' Report status - if the report has been generated, you can download it Source/destination IP addresses and ports this report is filtered by From '__startdate__' till '__enddate__' Report filter From __src_ip__ to __dst_ip__ Generate NetFlow statistics report Generate the NetFlow statistics report From any address to __dst_ip__ Waiting for the report generation 周期 The report has been generated. Click to download Do you really want to delete the reports Select a period for report From __src_ip__ to any address Any addresses Cannot generate the report. Reason: '__value__' Generating the report Trigger restored Trigger fire notification Hello Fire time Trigger fired Restore time Trigger subtype <br>--<br>"Triggers" Trigger parameters Trigger restore notification now minutes ago days ago hours ago more than one year ago With this check box selected, the system will send the notifications both when the trigger fires and when the issue is resolved Notification upon status recovery 'Trigger notification system' module settings By default deleting a trigger will also delete the events associated with that trigger. Clear this check box to keep event history 'Trigger notification system' module settings Save events after deletion of trigger Trigger(s) fired New events in the trigger history Notifications Time Trigger fire history Script Parameters Main Parameters of the event that the trigger fired upon Emails waiting to be sent to addresses '__value__' Time when the trigger send a signal that the status is back to initial state In queue Parameters that were passes when creating the trigger View detailed information about the trigger Trigger parameters Reset time Sent Failed Delete information about trigger fire In progress New record deleted Email addresses in the queue Emails were sent successfully to the following addresses Emails were sent to '__value__' Script execution result The name of the trigger Fire time The '__value__' script is running The '__value__' script completed successfully Time when the trigger fired __value__ Script results '__script__' script execution result: '__value__' In queue Event parameter Cannot send emails to '__value__' Trigger history Failed 状态 Successful Details Successful Name 状态 Delete Running In queue Notification status Sent Failed Script status Completed successfully Exact match Threshold Devices that the trigger will fire for Threshold Device type Name that was specified when adding a new device Measuring device which sensors should be selected Servers that the trigger will fire for Current value Type that was specified when adding a new device Parameters that were passes when creating a trigger Type that was specified when adding a new device Switch ports that the trigger will fire for Device type Model that was specified when adding a new device Model that was specified when adding a new device Rack that the trigger will fire for Measuring device Name that was specified when adding a new device disabled Trigger will fire provided that spare part names match Device type Current status Measuring device sensor that this trigger will fire for Select ports of this switch Equipment model Equipment model CPU type Equipment name Server Equipment model Switch Parameters on Equipment name Sensor Device Equipment name Port Rack PCI type <i>To receive the notifications, you need to configure the external mail server in the "Mail notifications" section. You should also specify emails for every user (in the user settings form) who will receive the notifications and confirm it by following the link in the email</i> The trigger will fire when the number of RAM in the ware houses reaches the threshold The trigger will fire when connection with switch(es) is lost The trigger will fire when sensor(s) temperature is high, i.e. the sensor temperature has exceeded the threshold (in °С) The trigger will fire when rack temperature is high, i.e. the server temperature in the rack has exceeded the threshold (in °С) The trigger will fire when traffic on one of the switch ports exceeds the threshold (in bytes) The last time the trigger fired on __value__ Sensor has higher temperature The name of the script that will be executed when the trigger fires. The scripts are located in the '/home/dci_trigger_user/scripts' directory (it will be created when creating a script) The trigger will fire when UPS battery is low, i.e. the time until complete battery discharge has exceeded the threshold (in minutes) The trigger will fire when UPS switches to battery The trigger will fire when there are few free user VLAN, i.e. when the number of user VLAN has exceeded the threshold (in °С) The trigger has fired Disabled trigger won't fire The trigger will fire in case data center power consumption increases, i.e. if power consumption exceeds the threshold (Wt*h) The script will be executed if the trigger fires. The scripts are located in the '/home/dci_trigger_user/scripts' directory (it will be created when creating a script) The script name will be executed when the trigger fires. The scripts are located in the '/home/dci_trigger_user/scripts' directory (it will be created when creating a script) Clone the selected triggers Switch UPS to battery Traffic exceeded on port(s) Switch not accessible Server enabled/disabled Select a user who will receive email notification when the trigger fires The trigger will fire when the number of servers in the warehouse reaches the threshold limit Trigger author Add new Edit trigger Data center power consumption exceeded Power supply Switch port accessible/not accessible Trigger enabled Few VLAN Rack temperature is high Trigger type Clone the trigger (cloning the trigger will copy the script with a new name) Few RAM Disable the selected triggers Script execution <a href="https://doc.ispsystem.com/index.php/Triggers" target="_blank">Triggers</a> The trigger will fire when the number of other devices in the warehouse reaches the threshold limit Few switches <i>The script with the identical name will be overwrittenlt</i> The user who created this trigger Enable the selected triggers Few CPU Few other devices The trigger will fire when the number of PCI in the warehouse reaches the threshold limit Trigger name Email notification Script name Few PCI Add new trigger <i>The script is used in '__value__' triggers</i> Delete trigger Enable triggers Router not accessible Email addresses that the notification was sent to after the trigger fired Add new Script contents. Clicking 'OK' will apply the changes The trigger will fire when the number of routers in the warehouse reaches the threshold limit Trigger category Script contents The trigger will fire when the switch port status changes (i.e. when enabling/disabling one of the ports) The trigger will fire when the connection with the router(s) fails The trigger will fire when the server power status changes The trigger will fire when the number of switches in the warehouse reaches the threshold limit Trigger disabled The trigger will fire when the number of CPU in the warehouse reaches the threshold limit Select existing Enable email notifications about trigger fire The trigger will fire when the number of HDD in the warehouse reaches the threshold limit Few servers Battery low on UPS Select a script that will be executed if the trigger fires Few routers Few hard drives Enable Disable Triggers Script trigger_script.sh Trigger 101 Email addresses Warehouse Script Type Clone Server Edit copy Users Temperature 网络 Add Name Category Delete Cannot delete VLAN: first you need to delete the networks added into this VLAN Select this check box to allow server owners to use admin access permission for IPMI console. There is no need to create a new IPMI user for the sever owner. Use admin access details <a href="https://doc.ispsystem.com/index.php/IPMI_console_module" target="_blank">IPMI console</a> To download the jnlp file, running via ihttpd, you need to select "Proxy via ihttpd" in the IPMI connection edit form Use proxy via ihttpd "IPMI console" module settings Configuration Reboot server Periodic function Enable server Prepare services Disable server Action when the operation is aborted Restore server status Cancel operation Unknown error set manually Diagnostics: invalid CPU information Hard drives move operation was executed on the server Diagnostics: an error occurred when trying to get IPMI information from DCImanager Diagnostics: an error occurred when trying to connect the IPMI user Disk with serial number '__hdd__' has invalid parameter: __value__ diagnostics RAID Diagnostics: RAID error connection speed move disks Server was marked as having problems platform The server was marked as having problems before diagnostics Diagnostics: error RAID - '__value__' Diagnostics: error RAID - '__value__' CPU Number of hard disks does not correspond to the type IPMI CPU number is more than specified in the platform type HDD Local connection speed is too low RAM amount is more than specified in the platform type A platform type is not selected for this server Hard disk performance does not correspond to the type RAM amount was not determined by diagnostics RAM Delete IP address Current rate in mA on server input Power usage per sever in kWh Power consumption Current Current Current consumption by servers in the rack Average current to server Energy consumption Power consumption Current power consumption by the server Power consumption Average current to servers in the rack Current power consumption by servers in the rack Here you can see the total amount of information in bytes and packets received via NetFlow protocol Traffic and number of packets from '__dst_ip__' Traffic and number of packets sent from all IP addresses 212.109.222.30 Top IP addresses. Outgoing traffic 80.87.203.12 Incoming traffic size Top IP addresses. Outgoing traffic from '__src_ip__' Outgoing traffic size Top IP addresses. Incoming traffic from '__src_ip__' Source IP address Top IP addresses. Incoming traffic NetFlow traffic volume Traffic and number of packets sent from '__src_ip__' to '__dst_ip__' Fill out this form to view statistics for a specific source IP address Package number Destination IP address Fill out this form to view statistics for a specific destination IP address Traffic and number of packets sent from '__dst_ip__' Traffic Communication channel load per server in rack (Burstable) Server communication channel load (Burstable) Shows the total amount of transmitted data in bytes on the selected device over a certain period Switch communication channel load (Burstable) Shows amount of data which are passed through the communication channel over a certain period (communication rate, bit/s) Amount of traffic which passed through servers in the rack Switch communication channel load Amount of traffic which passed through servers switches Server communication channel load Communication channel load per server in rack Shows actual bandwidth usage on burstable (95-percentile) Select a switch port to show the information Burstable Select a statistics type Select a server to show the information Select a switch to show the information Select a device to show the statistics Select a rack to show the information 状态标的 Select a server to show the information Amount of traffic for this server All switches 流量 All racks 状态类型 All ports All servers Network Switch Rack Port 负载 Switch Rack Outgoing Server Server Server Incoming Current rack temperature 状态 Current server temperature At this moment Select a device to show the statistics Select a rack to show the server statistics Period of time Temperature, °С Average temperature in rack Rack Temperature Temperature Server Server average temperature Last port of the range The upper limit of the port range that is used on the server with DCImanager for redirecting traffic from user to IPMI and back (the default value is 50000) Error reading the configuration file of the ihttpd server Invalid port range Cannot find the section to specify proxy ports in etc/ihttpd.conf (__value__) First port of the range The lower limit of the port range that is used on the server with DCImanager for redirecting traffic from user to IPMI and back (the default value is 49000) Now Never Select a period for automatic renewal of the secret link to open the IPMI web-interface via ihttpd proxy. Everyone can open the web-interface via the link. For security reasons we recommend that you enable the auto-update function (selecting "Now" will close connections via ihttpd-proxy due to the link update). Automatic renewal of the secret link Once a day Once a month Once a week Once an hour Allow administrator to choose connection method When connecting to IPMI web-interface an administrator can choose how he wants to connect (proxy via ihttpd will be available only if the corresponding option is enabled for the selected IPMI) 'IPMI proxy via ihttpd' settings The notification about found servers will be sent to the selected administrators Inform about found servers Users The selected administrators will be informed about found servers Notifications Rack for server search Select racks for server search. Please note: during this process DCImanager disables available port on PDU that are not marked as "Service"and checks server connection. Therefore, it defines PDU ports that servers are connected to. General settings Server authentication will be performed automatically during server search after diagnostics Automatic server authentication Authentication Server search settings By default, equipment manufacturer bar-codes are used for accounting and identification of your equipment. However, for better accounting, we suggest using your own bar-codes. You will need a bar-code scanner and a special printer. The process is the following: Once you receive equipment to the warehouse, the system generates a bar-code. Operator prints a list of bar-codes and sticks them to equipment according to their types specified when the equipment arrived. In order to confirm that equipment is received, you will only need to scan the bar-code and make sure that the equipment corresponds to the one added to the database. Further on, using the bar-code scanner will facilitate your operations with DCImanager. Privileged administrators who have the rights to write off the equipment and send it to repair.<br> You shall have at leat one administrator with such rights. If there is no one, this access will be given to all administrators.<br>We recommend to disable Modules rights in the list of Users, so that unprivileged administrators could not edit this setting. Select a warehouse which is mainly used in DCImanager rather than in locations Warehouse for the main 'location' Use bar-codes 'Warehouse' module settings Warehouse administrators Before you delete the server you need to remove equipment in the server edit form Delete server You need to confirm barcodes after you have sticked them to the equipment. Please scan your barcodes and enter the values to the filed Barcodes. This action is required to minimize possible errors. Enter the bar-codes. You can use a space, tabulation, new line, backspace '__barcode__' not found Confirm bar codes Bar codes Receive delivery copy Clone delivery Delivery copy with name Cancel equipment in delivery Group edit Default location Hard drive type Hard drive type RAM type CPU type PCI type PCI type CPU type RAM type Comment to sending your equipment to repair, which will be added to the main comment of the equipment, with date and administrator name. Confirmation of sending equipment to repair sent to maintenance mode with comment Comment Spare part type Before After 状态 Delivery name Delivery status Delivery date and supplier To warehouse (reserved) Bar-code that should be sticked on the equipment If you specify a date, the equipment will be returned to warehouse on the same day if it is not used Select what you want to do with the spare part that will be removed from the server This spare part is not registered in the warehouse. You need to select what you want to do with this spare Enter the model name or special type of the equipment. It will help identify it in future To warehouse (as broken) Remove equipment from server Action with spare part The spare part '__name__' will be removed from the server. You need to select what you want to do with this spare. Enter the serial number that equipment will have in the warehouse Enter a model or special equipment type. It will help identify it in future Add notes to the spare part in the warehouse Delete from the list -- Create new -- Reserve till Send to warehouse Model name Add in warehouse Bar-code Note Serial number Model Warehouse actual address Address Warehouse name Contact email Warehouse Contact phone number Enter any information related to this warehouse Do you really want to delete the selected warehouse Enter the warehouse name Notes Phone number Email Edit RAM Add RAM RAM Comment to equipment writeoff operation. It will be added to the main comment of the equipment, with date and administrator name. Confirmation of equipment writeoff wrote off with comment Comment Confirm that you want to receive the equipment Received Pending Move Move the selected equipment to the new supplier. The selected equipment will be deleted from the current delivery Do you really want to move the following equipment into the new delivery Equipment in delivery Do you really want to change the status into "Received" for the following equipment: Cancelled Do you really want to change the status into "Cancelled" for the following equipment: Cancelled Equipment status in delivery Change the status of the selected equipment into "Cancelled" Equipment category Received 状态 Category Equipment name Name Download Amount of RAM RAM size, MiB Notes RAM frequency Frequency, MHz Name Name RAM Additional information Select a new equipment type Select the server platform Platform Change equipment type Equipment name Equipment type Name Locations that use this warehouse Add warehouse Edit warehouse Ware house Name Locations Select delivery Move equipment to another delivery Not all the equipment is "Pending". You cannot move such equipment Cannot move the equipment to a closed delivery. Select another delivery or change the status of the current one <font color="blue"><i>The selected equipment will be moved from the current delivery into the new or existing one</i></font> --new-- Add delivery Price per item Spare part type Add equipment to delivery Category Number Equipment type Part specified before changes have been applied is not in the stock. Please specify what to do with the extracted part. Remove the diagnostics warning icon informing that the spare part is not found in the server Spare part '__name__' with serial number '__serial__' will be removed from the server. You need to select what you want to do with this spare. You cannot add one more __type__, as all the slots have been already used. The maximum number of slots in the '__platform__' platform: __count__ шт. Delete diagnostics warning PCI RAM Bar-code HDD Edit server equipment Bar code Spare part type Serial number Serial number Category Serial number Serial number Serial number Serial number Serial number Serial number CPU Switches Serial number: __serial__ Router Switches Other HDD CPU Other Hard disks Hard disks Other Spare part: __type__: __name__ __serial__ __barcode__ Bar code: __barcode__ CPU CPU PCI Servers Routers Server Switch RAM RAM Routers PCI devices RAM PCI devices Servers Comment to status change, which will be added after the standard comment If you specify a date, the equipment will be returned to warehouse on the same day if it is not used Enter a model or special equipment type. It will help identify it in future Enter the model name or special type of the equipment. It will help identify it in future Equipment successfully created. Click "Download" to upload the Excel file with bar-codes The server is put into the rack. Parameters cannot be changed Comment for write off/maintenance -- Create new -- Equipment price Model name Reserve till Generate a bar-code Select the server platform Number of details you want to create -- Add new to list -- Generate a bar-code Platform Equipment name Model Equipment Price Name Download Number Notes Site Description of a node, note etc. Phone number Supplier phone number Legal address Enter the legal address of the supplier Business address Supplier email Supplier web-site Email Enter the actual address of the supplier Suppliers Name Supplier name How many items of the selected category are available, from the total amount Available/Total Equipment type Equipment Details Equipment to After Bar code Category The equipment is places into warehouse The equipment is installed into server Enter a delivery identifier which is convenient for you. For example, delivery document number The equipment was reserved and cannot be placed into the server/switch The internal bar-code makes it easy to inventorize data-center equipment Change the equipment type. You will also need to select equipment model for CPU, RAM, HDD, and PCI. Download the CSV file with the selected bar-code that you can print Supplier, and the date when the delivery was closed Equipment serial number Enter additional information related to this equipment The equipment is received in the selected delivery Send the selected equipment to maintenance Equipment is marked broken The warehouse where this equipment is located The server where this equipment is located The switch where the equipment is located Equipment is placed to the delivery Equipment is placed to the switch Equipment is placed to the switch Equipment is placed to the rack Write off the selected inventory Type or name of equipment The barcode sticker has been confirmed Equipment is placed to the rack Barcode is not confirmed In delivery (expecting/cancelled) Confirm the barcodes Equipment is placed to the server In delivery (expecting/cancelled) Date when the spare part was added The equipment is received Delivery date and supplier The equipment is pending The equipment was cancelled Equipment location The equipment is in maintenance mode Written off Creation date Written off In server Broken In server In rack Equipment model The equipment is written off The equipment is broken The equipment is created Reserved The price has been changed Equipment price Change type Delivery document number Equipment status In rack Broken Print Reserved Bar code Note Ware house Input error Input error 状态 Confirm Price In switch Type Delivery Cancel Server Write off 状态 Under maintenance Equipment In stock Send for repair Model Input error In switch Under maintenance Switch In stock Sensor name Router name 10.10.10.1 10.10.10.2-10.10.10.254 vlan186 10.10.10.1 255.255.255.0 Enter the password that can be used to access the server where the server search template was running. Server with DCImanager Server search settings Password <i>The following are the network settings for server search. Usually, it is a private nonroutable network without Internet connection, for example 10.10.10.0/24. IP addresses from this network will be allocated temporarily to all found devices. Note: the IP address on the location server must be added to the interface that points to the same VLAN where new servers will be created.</i> <i>You need to specify the interface only if the search will be configured in several VLAN. <a href="https://doc.ispsystem.com/index.php/Server_search_options" target="_blank">Learn more</a></i> <a href="https://doc.ispsystem.com/index.php/Server_search_options" target="_blank">Server search options</a> General settings for the server search module Settings Server search options. Select a location where you want to run the server search process. Fill out the form. The IP address for server search must bound to the location interface and must not be included into the range for new servers. In the "Interface/Vlan" field you can enter the interface or Vlan where the search will run. IP address IP address on the DCImanager server where DHCP server will be set up. The IP address must be from the network for allocating temporary addresses Range of IP addresses that will allocated to new servers. The range must not contain the IP address DCImanager or location Select the location where you want to run server search (by default it is the server with DCImanager) Enter the name of the interface where you want to run server search. It is used if the server search will be performed in several VLANs. Leave the field blank, if you use only one VLAN. Learn more шт our Documentation. Address gateway for server search. Usually, this is the same address as the primary IP address. Edit settings for server search IP address on the location server where DHCP server will be set up. The IP address must be from the network for allocating temporary addresses "Server search" module settings Delete settings for server search Interface/Vlan Add new settings for server search Edit Range of IP addresses This template will be used for auto searching servers Add Network mask for server search. It should include DCImanager IP address, IP range, and Gateway for the server search network Delete Location Network mask Auto searсh template Failed to update the server search template on location '__loc_id__' '__type__ __object__ __value__' Failed to update the server search template on location Failed to cope template(s) to location Failed to copy template(s) to location '_loc_id__' Vlan Port description MAC-address on switch port Select how to connect to IPMI interface VNC proxy ihttpd proxy Without proxy Unmount shared NFS-directories with ISP-templates. Browser installation Installation of NFS utilities Create a standard user jnlp-files opening configuration Setting permissions for autorun script Installation of an old browser version for HP iLo Firewall exclussions configuration Restoring firewall rules at proxy server Copying autorun script VNC-server installation Deleting public key from a server Java installation Restoring firewall rules at a local server IP address of the server with DCImanager, which is accessible from proxy server (used for ISO mounting) Mounting of all ISOs available to the user on proxy server to user directory. It makes mounting of ISO on the target server available from WEB interface of IPMI of Java console Mount ISO-images IP address of DCImanager server Allow administrator to choose connection method Select the check box to allow administrator to select a connection method to IPMI interface (ihttpd proxy will be available provided that the corresponding option is enabled in configuration of the selected IPMI) Encrypt connection from noVNC to websockify Enable SSL for noVNC connection to websockify. Enable this option, f you work with the control panel using SSL Admin name Please accept Java/Oracle(c) terms of service for using IPMI proxying server. Full text of license is available at <a href="http://java.com/license" target="_blank">http://java.com/license</a> URL for SSH acess to IPMI proxy server. You can set 127.0.0.1 for installation to DCImanager server, however installation of proxy server to the same server with DCImanager is not recommended! It is highly recommended to install proxy function to a separate server (either virtual or dedicated). If proxy is configured via DCImanager server there is a high risk of receiving unauthorized acess to a target server because of using external software for proxying. Proxy creates additional server load, slowing down DCImanager. IPMI proxy server authorization type. Authorization can be completed with admin password or SSH key (it should be authorized on remote server for admin access). Public SSH-key to be copied to IPMI proxy server at admin's authorized_keys file Open SSH-key "IPMI proxy via auxiliary server" module configuration I agree with Java/Oracle terms of service Admin password for connecting IPMI proxy server Proxy server URL Proxy server port Admin name for connecting IPMI proxy server (usually root) Admin password Proxy server authorization type SSH connection port for IPMI proxy server (usually 22) Terms of using by SSH key By password NX-API Port. The default value is 8181 8181 NX-API password NX-API Enter a username to connect to NX-API Password Username Port Edit VLAN Cannot allocate VLAN. No available VLANS. Please, contact your service provider Cannot allocate VLAN. The number of VLANS available to the selected user, has been exceeded Enter a range of the VLAN identifier (VID). VLAN with VID from this range will be assigned to users in case of automatic allocation. Example: 1-15 29 50 333-400 VID range for users 1-15 29 50 333-400 "User VLAN" settings Members VLAN name VLAN Notes All the associated ports will be assigned to the VLAN by default. Do you really want to delete the selected VLAN VLAN ID VLAN members Enter a port number that you want to connect to the VLAN Enter a server that you want to add to the VLAN Add VLAN member No available connections. To assign a new port to the VLAN, make sure this port is assigned to the VLAN by default Port Server No available connections. To assign a new port to the VLAN, make sure this port is assigned to the VLAN by default Add VLAN member Enter a port number that you want to connect to the VLAN Select a server that you want to add to the VLAN Port Server Add a new VLAN member Notes Enter any information about this connection The port will be assigned to the VLAN by default. Do you really want to delete the VLAN member Port name Enter the name of the switch port Add Server label Id VLAN members Server Port speed '__value__' Port speed '__value__' Port speed '__value__' Port speed '__value__' Port speed '__value__' This port is enabled The VLAN associated with this server Port name Default VLAN No connection Enter any information about this connection Notes 网络连接 The port's status is unknown Unknown status Cable is plugged in The port is turned off Device connection failed Hidden connection Arista Command eAPI Username Password platform CPU Cannot delete the CPU socket. This socket is used in __object__ '__value__' Editing CPU socket Adding CPU socket Notes Socket name CPU sockets Additional information do not change This ISO-image will be available to all users Edit the selected ISO-image Delete the selected ISO-image auotomatically Provide any description of this image. Users will see this text in the list of ISO-images Create a new cron job for automatic deletion of this ISO-image Available to all ISO-image name Period in hours Set a period in hours that will pass before the template will be deleted automatically. When you enter a value into this field, deletion time will be automatically recalculated Enter a name for the image Description Select an ISO-image for upload: from a local machine, or using a URL to file on a remote server Enter the name for the ISO-image. Leaving the field blank will take a file name from the URL File name File type Enter a URL to the ISO-image you want to upload. E.g. http://example.com/dir/file.iso Provide any description of this image. Users will see this text in the list of ISO-images Upload ISO-image ISO-image on local machine URL to ISO-image on remote server This ISO-image will be available to all users Set a period in hours that will pass before the template will be deleted automatically. When you enter a value into this field, deletion time will be automatically recalculated Period in hours Available to all Local ISO-image URL Select an ISO-image you want to upload to the server Description 不能上传ISO镜像文件,请联系管理。 不能上传ISO镜像文件,请联系管理。 该ISO镜像文件仅所有人可访问 您是该ISO镜像文件的所有人 ISO文件所有人 上传 该ISO文件对所有用户可用 ISO镜像文件 镜像名称 计划删除时间 该ISO文件已就绪,可用 上传中 镜像大小 Set a period when the image will be deleted Enter a name for the image Change 上传镜像文件 Do you really want to delete 所有人 状态 状态 Id 删除 大小 Delete the connections to the switch and PDU. If you don't need to delete the connections, select the check box "Use different racks for equipment" in the Global settings module You are now transferring the server into another rack. Please note: the selected server has connections. Choose, please (click "Cancel" to cancel the server edit operation): Do not delete connections Delete all connections Confirmation Read rate, Mb/sec Hard disk types Hard disk type editing The lowest read rate. If by diagnostics a server has a less read rate then this value, this server will be marked as a problematic one. SMART parameters, which are used for by server diagnostics. If empty, then SMART will not be checked SMART parameters Adding hard disk type Title of hard disk type Press Finish to add a spare part Confirmation Delivery photo with delivery document number The list of serial numbers or bar-codes of spare parts, switches, and servers that will be written off Serial numbers or bar-codes __serial__ serial number not found To be able to return the spare part __serial__ , make sure its status is 'broken', or 'under maintenance' The spare part with serial number __serial__ must have "In stock" status. Click the "Return" button to set this status. If the spare part is now in the server or switch, click the "Set/remove" button Spare part with serial number __serial__ is not confirmed. No operations can be performed with such spare parts Server with serial number __serial__ already has one of the operating statuses. You need to put the server into service with the "Return" button to be able to set a desired operating status Under the warranty Input error List of serial numbers of spare parts, switches, and servers to be written off Serial numbers Broken Send for repair Broken The note will be added to all spare parts, switches, and servers to be written off Return Destroy Operations with equipment Id 状态 Add supplier Edit supplier Edit inventory object Create an inventory object Add a type with barcode Enter the name for this type Type name Barcode for this type. It should match the barcode entered on the previous step Select a category for this type Barcode type Category Dismatches in inventory Common sever Platform for blade servers Blade server Write off servers Find dismatches during inventory Inventory List of assets subject to inventory control Report Object . Add delivery The image will be saved into var/delivery_img and will be displayed in this form Attach image Price per item Total: Files Note Order information Select a warehouse that the equipment will be delivered to Enter additional information for this delivery Delivery status Equipment information Ware house 状态 Category Action Delete Number Edit Price Name Add delivery Edit delivery with delivery document number Inventory details Additional information about the object Base Not found Fact Found Not found Serial number Do you really want to mark the selected objects found Base Found Found Mark server (spare part) as found Fact Note Serial numbers or bar-codes Serial number or bar-code An error occurred when trying to take out the spare part from __device__ : spare part with serial number __serial__ is located in __another_device__ The __value__ detail is broken. You cannot add a broken detail into the server, switch, or other device Detail __value__ is not confirmed. You cannot add details with not confirmed barcodes Spare part with serial number __serial__ is not found in __device__ Serial numbers of spare parts that should be removed and added into the server or switch __value__ cannot be used as it is not "In stock" Spare part with serial number __value__ is not found The server has one of the operating statuses (broken, under maintenance, destroyed, input error). Spare parts cannot be added. User the "Return" button in the "Operations with equipment" form An error occurred when trying to add a spare part: spare part with serial number __serial__ is already used in device __device__ Sensor Set Remove Server, spare part or equipment search will be made based on this number Not found UPS Serial numbers of spare parts that should be removed and added into the server or switch Information about the server, spare part, or equipment Serial numbers Warehouse Scan Switch PDU Equipment 状态 Serial number Rack Spare Switch Information Server Add inventory Edit inventory Details Find dismatches between the fact and database Rack Dismatches found Spare parts Inventory 状态 The list of serial numbers with dismatches Dismatches not found Inventory devices Inventory was not performed on this object Bar codes of the spare parts in the warehouse Bar codes Serial number of spare parts in the warehosue Inventory Serial numbers Inventory Add a spare part with WWN Estimated date when the equipment will be delivered Do you really want to clone the selected delivery (including the equipment): How many items are received from the ordered amount Delivery identifier. For example, invoice number Actual delivery date Select the warehouse the equipment will be delivered to Equipment in this delivery Delivery creation date Clone the selected delivery with all the included equipment Pending/Open Warehouse Delivery status Received/Total Closed Clone Date Estimated delivery date Equipment Supplier Equipment Cancelled Download Upload photo into the server Total Photos Delivery Date when the hardware was received Total price for the equipment in this delivery Supplier that will deliver the equipment Upload Total price Name Download archive with photos Delivery identifier. For example, the delivery document number Execute recipe timeout reached for the '__recipe__' recipe on server '__server_id__' Execute recipe error connecting by SSH to server '__server_id__', IP address'__object__' the '__object__' method is not supported no IP addresses are assigned to the '__server_id__' server Failed to execute the '__recipe__' recipe on server '__server_id__' '__type__ __object__ __value__'. internal error. See additional information failed to execute the '__object__' recipe Name of aggregation to be removed Name Removal of aggregation Ports to be added to the aggregation being created Ports Creation of aggregation Type of aggregation to be created Name of aggregation to be created Name Type DCImanager - Warehouse module DCImanager - Handlers for dummy devices (number of ports is specified) DCImanager - IPmanager APIv2 - built-in IPmanager functions for all panels DCImanager - Arista handler (dcimgr.dci_arista) DCImanager - IPmanager APIv2 test module DCImanager - Eltex handler (dcimgr.dci_eltex) DCImanager - IPMI proxy via auxiliary server DCImanager - Websockify - supplementary software for IPMI proxy via auxiliary server DCImanager - IPMI proxy via ihttpd DCImanager - System services (dcimgr.dci_service) DCImanager - ISO-images (dcimgr.dci_iso) DCImanager - Eaton handler (dcimgr.dci_eaton_handler) DCImanager - Telnet management (dcimgr.telnet) DCImanager - General functions for modules management (dcimgr.sbin_utils) DCImanager - Processing module for test equipment (dcimgr.TestEqHandler) DCImanager - server management console (dcimgr.shell) DCImanager - OS templates list and edit forms (dcimgr.osmgr) DCImanager - Inventory list and edit forms (dcimgr.dci_inventory) DCImanager - General functions (dcimgr.utils) DCImanager - Utilities used in equipment handlers (dcimgr.dci_devhandler_utils) DCImanager - Basic handler,which functions are used in all other handlers (dcimgr.dci_device_hadler_base) DCImanager - Intel AMT handler (dcimgr.dci_intel_amt_handler) DCImanager - Custom handlers (dcimgr.dci_external_handler) DCImanager - Internal mechanism for handlers management. It is used when creating/editing/ deleting equipment, such as switches, PDU, etc. (dcimgr.dci_device_manager) DCImanager - Functions, which are used when executing SNMP calls to equipment (dcimgr.dci_snmp_impl) DCImanager - Operations - OS deployment, diagnostics, recovery mode, etc. (dcimgr.dci_osinstall) DCImanager - Automatic troubleshooting of server connections (dcimgr.dci_conn_autofix) DCImanager - Operations - setup, diagnostics, recovery mode, etc. (dcimgr.dci_operations) DCImanager - Additional utilities, which are used in all other modules (dcimgr.dci_utils) DCImanager - Servers list and edit form. Server connections. IP addresses management (dcimgr.dci_servers) DCImanager - Internal mechanism for handlers management. It is used when creating/deleting equipment, such as switches, PDU, etc. (dcimgr.dci_device_base) DCImanager - Equipment list and edit form (dcimgr.dci_equipment_type) DCImanager - Routers list and edit form (dcimgr.dci_routers) DCImanager - Locations list and edit form (dcimgr.dci_location) DCImanager - Juniper handler (dcimgr.dci_juniper_handler) DCImanager - Orders list and edit form (dcimgr.dci_acquisition) DCImanager - Liberty handlers (dcimgr.dci_liberty_handler) DCImanager - Internal mechanism for threads management (dcimgr.dci_threadmgr) DCImanager - List of spare parts and edit form (dcimgr.dci_spares) DCImanager - Internal mechanism for statistics collection (dcimgr.stat) DCImanager - Switches list and edit form (dcimgr.dci_switch) DCImanager - Sensors list and edit form (dcimgr.dci_measure) DCImanager - Initialization of main structures and elements (dcimgr.dci_main) DCImanager - Racktivity handler (dcimgr.dci_racktivity_handler) DCImanager - ISPSystem Power Switch (dcimgr.dci_isppdu) DCImanager - SNMP Common (dcimgr.dci_snmp_common_handler) DCImanager - OS tests for server types (dcimgr.dci_typecheck) DCImanager - APC handler (dcimgr.dci_apc_handler) DCImanager - Huawei handler (dcimgr.dci_huawei_handler) DCImanager - DLink handler (dcimgr.dci_dlink_handler) DCImanager - UPS list and edit form (dcimgr.dci_ups) DCImanager - HP handler (dcimgr.dci_hp_handler) DCImanager - Brocade handler (dcimgr.dci_brocade_handler) DCImanager - PDU list and edit form (dcimgr.dci_pdu) DCImanager - Statistics report (dcimgr.dci_statistics_reports) DCImanager - Ping3 handler (dcimgr.dci_ping3_handler) DCImanager - Outdated panel installer. (dcimgr.pkgdcimgr) DCImanager - Statistics (dcimgr.dci_statistics_impl) DCImanager - Zyxel handler (dcimgr.dci_zyxel_handler) DCImanager - IPMI handler (dcimgr.dci_ipmi_handler) DCImanager - Bird configuration (dcimgr.dci_bird) DCImanager - Cisco handler (dcimgr.dci_cisco_handler) DCImanager - Netflow statistics collection (dcimgr.dci_netflow) DCImanager - SNMP Common v2 (dcimgr.dci_snmp_common_v2_handler) DCImanager - Racks list and edit form (dcimgr.dci_racks) DCImanager - User authentication (dcimgr.dci_auth) DCImanager - VirtualBox test handler (dcimgr.dci_vbox_handler) DCImanager - VLAN list and edit form (dcimgr.dci_vlans) DCImanager - Import from DSmanager (dcimgr.dci_dsmgr_import) DCImanager - KVM (dcimgr.dci_kvm) DCImanager - Database structure (dcimgr.dci_dbstruct) DCImanager - NETCONF (dcimgr.dci_netconf_impl) DCImanager - SSH utilities (dcimgr.sshutils) DCImanager - SAMBA (dcimgr.dci_samba) DCImanager - Users (dcimgr.dci_users) DCImanager - NFS (dcimgr.dci_nfs) DCImanager - DHCP configuration (dcimgr.dci_dhcp) DCImanager - Server search (dcimgr.dci_serversearch) DCImanager - Datacenter map (dcimgr.dci_dcmap) Power management Choose power management type for power consumption statistics Type Enter sockets for CPU Enter scalability for CPU Add platforms Select a power management type for statistics Connect this server to IPMI Connect this server to PDU Add servers Download OS templates Add switches Connect server to switch Add PDU Task completed 状态 Task not completed Add IP ranges Configuration tasks Task Add racks It shows the burstable, and average and maximum traffic reports. Statistics is kept only for the current and previous months The 95th percentile of prevailing traffic in 5-minute sample Prevailing burst Server from which you want to collect statistics Average incoming Max. outgoing Incoming burst Max. incoming Network load Average outgoing Outgoing burst Error with location configuration Failed to configure location DHCP service is not restarted on a remote server Error occured during restart of DHCP on a remote server Not enough parameters for operation with this location Failed to restart remote DHCP server due to incorrect location parameters Server Server selection An error occurred when trying to connect to dcimini on the location. Reason: '__value__' An error occurred when trying to update the packages on the location. Reason: '__value__' An error occurred when trying to install dcimini on the location. Reason: '__value__' An error occurred when trying to update the packages on the DCImanager server. Reason: '__value__' An error occurred when trying to install the package on the location. Reason: '__value__' dcimini configuration Package setup: coremanager Package setup: dcimanager-mini dcimini setup Server access Enter IP addresses of name servers that will be set up on the server after OS template. You can use IPv4 or IPv6. Leave the field blank if you do not want to create additional name servers. In this case the name servers that DCImanager uses, will be set up on the target server after OS template. VLAN for server search not found You cannot use this function. Please, enable server search first Name servers Enable the server search function Server IP address IP range Synchronization of server search template Updating list of packages 192.168.100.2-192.168.100.253 Package setup: coremanager-pkg-tftp Network mask of temporary IP addresses '__value__' IP address for server search is not found on the network interface of location server Package setup: rsync Package setup: coremanager-pkg-nfs Adding record to known_hosts This IP address should be assigned to the network interface of location server. The IP address should be from the same network as the range for allocation of temporary IP addresses DHCP configuration Checking configuration of server search '__command__' command terminated with '__value__' coe Enter a range of temporary IP addresses for allocation to unknown servers. It should not include IP address of the location server Add repository Package setup: coremanager-pkg-samba Check connection Server search configuration Package setup: coremanager-pkg-dhcp Disable server search Enable server search for this location Default gateway for server search network 255.255.255.0 Data-center 101 10.10.10.10 192.168.100.254 root Network gateway Network mask 192.168.100.1 22 Search servers Search servers <a href="http://en.5.ispdoc.com/index.php/Locations_in_DCImanager" target="_blank">How to configure locations</a> local General information Number of a port used for SSH service of the location Location IP address. DCImanager will use to SSH connection and configuration (OS templates synchronization, DHCP and TFTP packages installation) SSH port Location edit Superuser remote by SSH key This user will be used by DCImanager for SSH connection and configuration (OS templates synchronization, DHCP and TFTP packages installation). User must have admin permissions By password Comment Enter the meaningful name of the location IP-address Description of a node, note etc. Authorization on a remote server can be performed by admin password or SSH key that was authorized on the remote server for superuser access Creation of location Server authorization Superuser password Type of IP-addresses that will be used for servers in this location Location Public key Location admin password. This password will be used only for locale creation. DCImanager will use it to connect to the server and add its public key to authorized_keys Location type Specified public key of the panel should be put in a list of autorized key for this location Block of IP addresses Select an administrator responsible for the location Location actual address Select a warehouse which is used for this location Address Description of a node, note etc. Location name Ware house Comment Owner Block of IP addresses Type of IP-addresses that will be used for servers in this location Main IP-address of the location (used also for SSH connection) Do you really want to delete location: Locations Meaningful name of location IP-address Location configuration is in progress Error in installation of a location. Click the icon for more information 状态 Load Total load on switch ports over the last 5 minutes Switch load Switch load Hard disk types Hard disk types HDDs HDD size Size (Gb) Slot RAM Enter the number of RAM slots in this platform Select a CPU socket type Type of CPU socket Number of servers Server size Platform size Server size in units Number of slots for blade servers Number of servers of this type CPU sockets PCI slots Number of HDD slots in this platform HDD slots Number of PCI slots in this platform Maximum RAM that can be added to this platform Platform types Max. RAM (Gb) Number of CPU sockets in this platform Common server Common server Common server Common server Blade server Chassis for blade servers PCI devices Type of this equipment Type Number of blades Number of blades Common server 2Unit Server Internal name of platform type (eg. E3 Blade, 1Unit Server, Multix4DE5 - multi-node). Configuration name for a special column in Servers list section will be generated automatically depending on actual server characteristics (HDD volume and disks amount, RAM, etc.) New platform type Determines which processors can be added to server Type of CPU socket Edit platform type Type Select platform type Blade server Platform for blade servers Scalability Socket of the CPU installed in the platform CPU modes in systems with several sockets Socket types for CPU CPU socket types Type of CPU socket E5-2620 Full name of processor (not processed). During server diagnostics, server is determined and added to "Processors" if it was previously missing in this list. Whether it is there or missing is determined by using this field, not the alias name field Short name, which is used during platform name generation. If DCImanager creates processor during diagnostics, the alias will be generated automatically Socket compatible with this processor Alias name Additional information Note Socket Processors PCI Editing PCI device RAID controller Adding PCI device Hitachi HDS723020BLA642 Hard drive model Editing HDD HDD interface for data exchange Adding HDD Type CPU Adding processor Editing processor Juniper switch handler. Enhanced mechanism for getting a list of VLANs. Server operations. Modified the template upload protocol: TFTP was changed into HTTP. This change is not applied to the templates with "noipxe" name prefix. Server edit form. A parent chassis of a blade-server can be selected when changing the rack. Hard drive move. New option in the Tools → "Move hard drives". Selecting the check box will interchange the hard drive after completing the operation. Server connections. Servers which MAC-addresses were not found on the port switch were displayed incorrectly. Network connections. Added a new icon displaying current speed of the port connected to the server. Server edit form. Added the "Model" column into the list of server spare parts. When adding or editing a spare part the module will be shown in the drop-down list of serial numbers. IPMI proxy via ihttpd. Access to IPMI with permissions of non-privileged user specified in the IPMI connection settings. IPMI proxy via auxiliary server. Added a new button with a brief description of how to work in the interface. The button is available on the noVNC page. Trigger notifications module. Fixed trigger filters. Warehouse. Modified the filter on the Warehouse form (Warehouse -> Equipment -> Details). You can now search by several serial numbers/ barcodes. Server edit form. The system will verify the serial number when removing equipment from the server. The detail will be added in the Warehouse afterwards. Trigger notification system. Trigger identifier can be passed to a script. Trigger notification system. Added an example of event parameters in the script. Default script content for different subtypes of triggers is now uploaded correctly. Diagnostics. Server data were not saved after diagnostics. The error occurred if the server had two or more similar RAM modules with undefined CPU (0). List of servers. Fixed server order bug: in BILLmanager customers could order servers that have problems in DCImanager. ISO镜像文件. ISO-image size will be hidden during upload in DCImanager. "Inventory" module. Fixed: issue with adding a server in spares by operator level. NetFlow module. Added feature to generate HTML reports. Servers. Fixed duplication of error messages in the server information section. Proxying IPMI with an extra server. Added feature to display windows in noVNC interface. A handler for Juniper switches. Introduced support for Juniper switches with JunOS 15. NetFlow Module. NetFlow option was removed from Network statistics section. The report was impossible to use due to a large amount of information. The date output format for NetFlow report has been changed. "Server search" section. On the configuration form you can select racks to perform the server search operation. IPMI proxy via auxiliary server. Added window formatting inside the noVNC interface IPMI proxy via auxiliary server. IPMI interface connection methods: a connection method won't be displayed if the corresponding module is not installed. Server search. The "Search" button is added into the "Found servers" form. It can be used to search server connections. IPMI proxy via auxiliary server noVNC interface now includes the Usage guide. VPU. Added a new mechanism that doesn't allow to add VPU networks that were released in IPmanager by mistake. Blade-servers. Modified the algorithm for adding blade-servers: the system will check chassis size. IPMI proxy via ihttpd. Modified automatic updates of the secret link to IPMI. When adding the link, all the active connections to Java-console will be terminated. Locations. If IPMI is located inside locations, the requests will be send via locations. IPMI proxy via auxiliary server. Changed location and size of the buttons to paste login and password in the noVNC interface. Operations. Fixed restart of dhcpd service when trying to install with IPv6. "Trigger notification system". A new module "Trigger notification system" allows DCImanager admins to configure automatic execution of scripts and send notifications when certain events take place. <a href="https://doc.ispsystem.com/index.php/Triggers"></a> UPS. Fixed the bug with saving statuses after getting updated information from device. Servers. When changing racks of the parent chassis with remote connections, blade-server connections will be deleted. Platform types. The maximum number of server disks from 30 to 90. Error notifications. IPMI access error notifications now provide more information. IPMI proxy via auxiliary server Removed the indicator showing that the proxy server has been set up. This indicator caused the situation when no recent fixes were shown during the switch between the servers. Server search. Connection search. Changed the principle of the server search. Servers from the list Tools → Found servers will continue loading with the server search template after they have been rebooted. Changed the principle of the connection search. Connections are now searched for all servers from the list Tools → Found servers. IPMI proxy via auxiliary server. You can now run a Java-console from the file with spaces and brackets in the name IPMI proxy. Fixed a number bugs related to IPMI proxy via auxiliary server. Users cannot escape from restricted browser via the link in the pop-up window. IPMI proxy via additional sever. Java update notifications are no longer displayed. IPMI user The maximum user password length is 15 characters. Racks. The system will check the number of units in a rack when changing the space occupied by server equipment. VPU module. VPU settings can be configured in a separate section. IPMI can be configured automatically when adding a server into the VPU network. Learn more. NetFlow statistics. NetFlow statistics settings can be configured in a separate section. Statistics can be displayed and exported. <a href="https://doc.ispsystem.com/index.php/Netwflow"></a> Server search. The server search template now includes the 'NoAskingSerialNumber' and 'NoAskingLabel' options. <a href="https://doc.ispsystem.com/index.php/DCImanager_configuration_file"></a> Found servers. A new mechanism displays information about switch or PDU connection status. Connection servers. The "Add IPMI" button is deprecated. IP allocation procedure is modified: an IP address will be assigned when adding an IPMI via the "Add" button. You can enter a certain IP manually or select it from a group of IP addresses. ISO-images. Fixed the algorithm for checking extension of uploaded files. Fixed the procedure for mounting ISO-images in case of IPMI proxy via auxiliary server. ISO-images. The system will check files of ISO-images. If the fails are not found, the image will be marked as problematic. Diagnostics. Modified the procedure that defines RAM type during diagnostics. Added a new option into the "Global settings" module - "Check RAM frequency during diagnostics" <a href="https://doc.ispsystem.com/index.php/Global_settings_(DCImanager)#Policy"></a> Server diagnostics. Increased timeout between attempts to create an "operator" if IPMI is not accessible. Warehouse. Fixed the filters inside spare parts categories. Servers. Unit number in a list of servers is now displayed correctly. The bug occurred with the OldServerType option enabled. IPMI proxy via auxiliary server. Fixed the mouse cursor bug in noVNC window. The bug occurred in Chrome on devices without touch-screen. IPMI console. Added the "Use proxy via ihttpd" option which allows to download the IPMI console using proxy via ihttpd. Hard drive type. Improved the mechanism of defining hard disk drive during diagnosticians: now the system analyses harddrive rotation speed. Integration with Juniper router. You can enable automatic configuration of the interface for VPU. Introduced support of Cisco C45XX switches. Server diagnostics. Fixed the bug that occurred when creating an "operator" on IPMI during server diagnostics. IPMI proxy via auxiliary server. Fixed the bug with a mouse cursor in the noVNC windows on Chrome. The bug occurred on touch screen devices. IPMI users. Fixed IPMI users suspension algorytm in the diagnostis template. Server diagnostics. If IPMI is found during server diagnostics the system will define the protocol that is used for IPMI: "IPMI v1.5/v2.0" or "IPMI v2.0 (lanplus)". Servers. Fixed display of server type on the edit form. The bug occurred if the "OldServerType" oprtion was enabled. IPMI proxy via auxiliary server. Fixed: processing of ISO-image mounting error: connection remains active even in case of errors. Statistics. Introduced a new mechanism for collecting and displaying statistics. <a href="https://doc.ispsystem.com/index.php/Statistics_(new))"></a> Useful links. The link to the "Inventory" article was deleted from all the versions of the control panel where this module is not supported. IPMI console. Fixed: upload of the console file for some Supermicro. Statistics. Fixed: traffic was displayed incorrectly. Statistics. Fixed: incoming and outgoing traffic was displayed incorrectly. Hard drives. SMART disk can be saved after it is removed from server. The "Warehouse" module must be enabled. Servers. Fixed error of saving the mark "Server has equipment issues" after successful diagnostics. Juniper switch. Fixed the 'no_such_port' error in logs of switches with JunOS 13. Servers. The server edit form and list of server will now display information about errors found during diagnostics. OS deployment. Added a link to the "Software raid" in the "Operations with server" section -- "Useful links" on Admin level. Operations with servers. The "Clear disks" option is now available for customers. Activating this option will start a selected diagnostics template with disk cleaning. Hard disks. Fixed the bug that occurred when trying to edit the disk in server configuration. OS deployment. Improved the mechanism that defines available RAID: the system will consider HDD types (SSD, SATA, etc.). Software RAID can be configured only if hard drives of the same size are connected. <a href="https://doc.ispsystem.com/index.php/Software_RAID"></a> IPMI connection type. If administrator is trying to connect and the "Ask administrator whether proxy can be used" check box is selected, IPMI will be activated according to the method specified in IPMI connection edit form. The "Ask administrator whether proxy can be used" check box is displayed on the "IPMI proxy via ihttpd" form. Server history. Fixed: IP address of the user who run a server operation is now displayed correctly. OS deployment. Fixed automatic selection of "RAID1" in the "Configure program RAID" field when changing OS template in "Install OS from template". The bug occurred if hardware RAID-controller was found in the server. OS installation. Fixed OS installation without software RAID. The operation start form now displays information about hardware RAID (if it is found on the server). Server history. Server history was displayed incorrectly after adding or deleting IP addresses for the second time. Servers. Fixed installation of a blade server into racks if the 'OldServerType' option was enabled. Servers - Connections Now the system remembers the type of the last connected device. Switches. Aggregated switch management function is now supported for some switches. The following models support this function: Cisco Catalyst, Eltex 2XXX, Eltex 5XXX. Switches. Aggregated switch management function is now supported for some switches. <a href="https://doc.ispsystem.com/index.php/Switch_management#Aggregated_ports"></a> Warehouse. Fixed creation of several pieces of equipment in existing delivery. OS deployment. Fixed: OS deployment with RAID 1 instead of deployment without RAID. Server search. A number of improvements were made to the module interface. Statistics. The "Connections" section is renamed into "Correction of connections" and is now located in the "Tools" section. Added information about server unit number. Brocade FCX switches. VLAN in the list of ports is now displayed correctly. Switches. The "Save" button is no longer displayed for switches that don't have configuration file save function. Dashboard. Information about the number of PDU is now displayed in "Information"--> "Equipment information" Inventory information was collected incorrectly. Fixed: equipment installed into server was not inventorized. Server release. When a server is released, its current VLAN will be changed into the default VLAN. "Warehouse" module. Fixed synchronization between warehouse and servers: changed spare parts were not displayed in the list of servers. IPMI users. Fixed deletion of users for IPMI with iDRAC9. Fixed vulnerability bug. NVMе disks. Added support of disks connected via NVMе. Server search. Added the possibility to enable automatic server authorization after diagnostics: Automatic server authorization is activated in server search module settings. Inventory module. Added a new module for inventory and parts management. Changed the process of eqiding equipment in servers. <a href="https://doc.ispsystem.com/index.php/Warehouse"></a> Servers. Changed: method of faulty server representation. They are now in the list of all servers. Their representation can be changed by using the filter. Server search. Fixed: issue with updating of server search template. Server search. Fixed: error of wrong selection of TFTP server address for server search in locations. Statistics. Changed: period of IPMI stats collection. It will be collected not more often than once per hour. Modules. Fixed installation of "IPMI console" module. Server search. Fixed the bug that occurred when adding TFTP-server address automatically into the DHCP configuration file. OS installation. Fixed DHCP restart but which occurred in case of group installation. Server connections edit form. The "How to connect to IPMI" field is displayed only on the IPMI connection form Modules. Added a number of useful links. Group edit. Fixed: new owner is now assigned correctly to all the servers that you edit. IPMI users. Updated information about IPMI users will be displayed in the web-interface. IPMI users: new function. The 'setipmioper' function allows a server owner to create IPMI operator on all available IPMI. <a href="https://doc.ispsystem.com/index.php/Global_settings_(DCImanager)"></a> IPMI proxy via additional sever. The "Java plug-in" filed was renamed into "Support of old IPMI types" Servers under maintenance. Servers "under maintenance" are now displayed correctly in a full list of machines without the "Server under maintenance" filter. Server search. The "Server search" section and the "Allow server search" check box will be available only after the "Server search" module is installed. IPMI proxy via auxiliary server. After you clear the "Mount ISO-images" check box or change the proxy server, all ISO-images will be unmounted. Equipment. Fixed: an invalid connection icon was displayed in the list of equipment by mistake. Servers. Fixed a bug that occurred when specifying blade-server slot in case the old server types were used. Block servers. Fixed: a server will be blocked in case of error when shutting down a switch port. Switch configuration file. Fixed the auto-save bug. IPMI proxy server Fixed a bug that occurred when saving module settings when trying to change server status to "Inaccessible". OS installation. The last installed OS template will be put first on the list. Diagnostics. IPMI operator can be created during server diagnostics. IPMI. Administrators can specify how a server owner can connect to IPMI. Servers. Fixed: 'hostname' won't be deleted when deleting all IP addresses of the server. IPMI proxy via auxiliary server. Fixed proxy server re-installation. Server search. Server search functions can be set in a separate menu section. <a href="https://doc.ispsystem.com/index.php/Search_servers"></a> IPMI proxy via auxiliary server. noVNC window resolution is increased to 1280x960. IPMI proxy via auxiliary server. Improved the noVNC authorization form: when a user is logged in as server owner, authentication data will be sent automatically. IPMI proxy via auxiliary server Fixed the bug that occurred in some browser versions if ISO mounting was enabled, but ISO-images were missing. Name servers. Modified the name server edit form. Server diagnostics. The "Platform model" field containing information about chassis is added on the server edit form. Server. Added synchronization for unit number and size for old and new server types. IPMI proxy via auxiliary server. The '/usr/local/mgr5/skins/common/novnc' is renamed into '/usr/local/mgr5/skins/common/novnc_dci'. Operations. Fixed: the operation hanged when enabling the HardIpmiReset option. Dashboard. Added the "Help" link to Documentation. Server history. Removed a number of unnecessary records in a new server history. IPMI proxy via auxiliary server. Fixed installation of a new browser on proxy server. IPMI. You can now select an IPMI user for server owner. IPMI information. A new field is displayed for IPMI devices in the "Server connection" section. Juniper switches. Switch configuration will be saved even after the port is modified. Chassis for blade-servers. "On.", "Off.", "Operations" and "IP addresses" buttons are now longer displayed for "Chassis for blade-servers" servers . IPMI proxy via auxiliary server. Added new buttons for sending login and password from noVNC interface. <a href="https://doc.ispsystem.com/index.php/IPMI_Proxy_v2"></a> Module IPMI console Added the module IPMI console. It allows users and administrators to load the IPMI console directly from DCImanager interface. <a href="https://doc.ispsystem.com/index.php/Module_IPMI_console"></a> Servers. Added possibility to mark machines under repair in the list of all servers Operations. Added setting for operation timeout to Global settings. ISOs. An ISO cannot be uploaded to the server if ISO uploading ended up with an error. Equipment. Changed processing algorythm of the unit and equipment size number. Operations. Added icon "Operation is being cancelled" to the status column. Locations. Fixed template synchronization for locations. Cisco Catalyst switches. Trank is no longer reset from port, if it is a trank port and it doesn't have connection. IPMI proxy via ihttpd. You can now manage IPMI proxy via ihttpd in a separate module, which can be disabled if needed. IPMI proxy via auxiliary server. Proxy server now checks accessibility of WEB-interface. Cisco Catalyst switches. Fixed: Native Vlan was displayed incorrectly.The error occurred after switch inquiry. IPMI proxy via auxiliary server. Updated jre (Java) package version for proxy server. Server search. You can specify certain parameters for server via the script located on the same server. <a href="https://doc.ispsystem.com/index.php/Search_servers"></a> Switches. You can now add double switches. <a href="https://doc.ispsystem.com/index.php/Switch_management"></a> Operations with servers. In the configuration file you can set timeout for operations with servers. <a href="https://doc.ispsystem.com/index.php/DCImanager_configuration_file#Parameters"></a> IPMI proxy via auxiliary server. Added the second browser on proxy-server for correct operation with new IPMI versions. Server search. Fixed the server search template. After the template was updated, DCImanager continued using the old template. Switches. Switch configuration can be saved automatically into non-volatile storage. Operations with server. Deprecated: you can no longer boot server in recovery mode from IP-v6. Global search. You can now search servers by id, MAC-address, port, and serial number of spare part. Server edit form. Fixed: it was not possible to save information about blade-slot number. IPMI proxy via auxiliary server. Modified the way how files in ISO directory on proxy server are displayed. IPMI statistics. Fixed: IPMI status was displayed incorrectly when collecting statistics. User VLAN. Fixed: vlans for users can be used several times. User Vlan. Fixed: hidden network connections were available to users Server connections. Server connection with IPMI MAC address is automatically marked as service connection, if the corresponding option is enabled in global settings. Notifications Added automatic check of connection to devices, in case the system shows connection error alert. Check starts once in 5 minutes Switches You can now disable auto-detection of Uplink ports OS templates Modified iPXE operating principle Cisco Nexus. Fixed: DCImanager failed while working with Cisco Nexus. Server search Added new command which allows to enable server search in VLANs <a href="https://doc.ispsystem.com/index.php/Search_servers"></a> OS templates Introduced support of UEFI NetFlow. 'path CopyFlowPath' parameter has been added in the configuration file. It allows enabling copying a raw NetFlow data into the specified directory. Locations. Checking IP address and OS has been added at creating a new location Hanging of operations. The error of hanging operations with devices has been fixed. It arose when a power management equipment hadn't responded for a long time. Authentication When a user with "Superuser" permissions logs in to control panel, he will be automatically redirected to "Admin" level IPMI temperature Information about server temperature is collected together with statistics Server search algorithm Fixed: database record for server search could be changed. For example, record for server with id=3 could be changed into record for server id=35 Server activation Fixed: activation of servers after blocking now takes less time Power management via IPMI Fixed power management bug for HP G6 and G7. Power management via IPMI Fixed: power management bug for HP G6 and G7. Statistics Fixed: invalid values in burstable statistics Intel processors. Updated the list of the available processors. IPMI proxying via the additional server. Added option to mount ISOs on proxy server for further mounting to the target server. Fixed calculation of available active servers. Service ports and Uplink ports are marked in use. Configuration of primary network port will be imported together with hard drives IPMI proxy via auxiliary server Introduced support of Dell IDRAC 8. IPMI admin name is now displayed in noVNC interface Fixed duplication or records in connections statistics. Fixed: server history now shows users who performed operation with server (reboot, power on/off) Fixed deletion of ISO-images Fixed: SSH access icon was not displayed in recovery mode if IPv6 was selected for server Disable, Enable, Operations, and IP addresses fields are now hidden for servers "Chassis for blade servers" Fixed: unnecessary fields were displayed on the ISO upload form Connection problems in Switch and Port lists Fixed: connection issue button is now displayed correctly Added a new command for resetting the Bird configuration file. <a href="https://doc.ispsystem.com/index.php/VPU_mode"></a> IPMI proxy via auxiliary server Added a new option that allows administrators to select how IPMI web-interface should open (directly, through ihttpd, through VNC) Diagnostics log in hints Added missing information to diagnostics log in the list of servers Dummy devices with ports Added dummy handlers for switches/PDU Corrected scalability for socket G34 processors Temperature monitoring Fixed: server temperature statistics was not collected from IPMI HP G6 and HP G7 IPMI proxy via auxiliary server Fixed: generation of exceptions for JAVA. In case of long URL of IPMI web-interfaces, JAVA-console could not start due to certificate issues IPMI proxy via auxiliary server Fixed: IPMI web-interfaces that use base authentication now open correctly IPMI proxy via auxiliary server Fixed: failure to connect to ports reserved in browser (6000, 6665–6669, 6697) failed IPMI proxy password Added: new interface button to send buffer content to either side. noVNC heading now shows IPMI password on admin level IPM proxy via additional server Fixed: deletion of VNC-port block files on additional server after restart of IPMI interface tab IPM proxy via additional server Value of the next port for noVNC is now kept in separate file of the var directory IPMI proxy via ihttpd Fixed: "manager" was removed from URL. IPMI opened with incorrect URL and failed The system will check that IPMI URL is accessible before setting up noVNC (in the "IPMI proxy" module) Name servers for dedicated servers Up to four name servers can be added for dedicated servers in the Global settings module. Separate list of name servers can be specified for locations IPMi proxy IPMIProxyV2Ssl.option option can be enabled in the proxy configuration module. In earlier versions this option could be activated only in the configuration file APC PDU Fixed: DCImanager could not connected to device via SNMPv3 after device reboot Custom switch handlers Added pvlan (only for the main vlan) for custom switch handlers Eltex switches Fixed: speed and port duplex management A new module for IPMI web-interface proxy New proxy module runs via noVNC, websockify, and external server with VNC-server and browser. <a href="https://doc.ispsystem.ru/index.php/IPMI_Proxy_v2"></a> New module for IPMI web-interface proxy New module runs via noVNC, websockify and external server with VNC-server and browser <a href="https://doc.ispsystem.ru/index.php/IPMI_Proxy_v2"></a> OS installation Fixed: only half of additional IP-addresses was added during OS installation. Inventory Broken servers were displayed with mistakes even if inventory module was disabled User editing Admin and operator users could see and edit "VLAN amount" field Password on add/edit forms Disabled password displaying in the "SSH password" and "SNMP community" fields on PDU add/edit form Security fix Switches Cisco Nexus 5xxx is supported now Edit server "Unit number" was not displayed in some versions DCImanager Progressive Fixed the license bug Server diagnostics Server diagnostics will now also analyse disks in RAID controller Chassis for blade-servers Fields with CPU, HDD and PCI were displayed in the chassis edit form SNMPv3 for APC PDU Fixed the bug that occurred when handling requests via SNMPv3. Only for APC PDU. Bird management Now if the incorrect config is generated, the user will see the error message, and the config will be reset Diagnostics A platform with invalid socket was created during diagnostics VPU Fixed incorrect configuration of DHCP in case the VPU is used VLAN management Port can be deleted from VLAN Server configuration field can be regenerated if CPU alias or HDD type changes You can now specify a unit number for switches. The "Blade-slot" field was added for blade-servers Rack size limit The maximum rack size, equipment size and number in a rack sis 99 PDU ports Disabling a server will first disabled a IPMI, then a PDU. Activating a server will perform the reverse operation Platforms Now it's possible to add 7 PCI slots Saving server power status after diagnostics Changed logics of choosing server power status after diagnostics: If global settings don't have "Turn off servers after diagnostics" checked, server status before diagnostics would be saved and restored after diagnostics. Server edit Fixed error with filling Parent chassis list Router size in a rack Router size can be now modified in the edit form DHCP-server configuration file The host section were not deleted from the DHCP configuration files in one of the following cases; 1. If a server had 2 or more network cards (according to diagnostics results). 2. After changing server's MAC address to a different address, which was not defined after by the diagnostics process Change of server rack Now you cannot select a rack from another location in the server edit form, if the certain rack is already selected for that server Recovery mode. Server boot to recovery mode with main IP-address instead of IP-address chosen by user fix Additional fields in tables Additional fields could not be added into a table, if the /usr/local/mgr5/etc/sql/{product_name}.{table_name}.addon was created Server history Information about the second and further server reboot was not shown on the server history page Optimization of the server edit procedure The server edit procedure took long time, if there were many users and HDD types in DCImanager Server search Improved hints to fields in the servers search form. You can now add a range of IP addresses (XX.XX.XX.XX/YY) burstable statistics Fixed calculation of burstable statistics in case two or more network interfaces are used: now traffic is summed up. Channel load storage period is extended from 1 to 2 months Implemented new experimental IP management system instead of IPmanager. It can be enabled with the "Option IpManagement2" parameters in the configuration file of a control panel. Server search The system did not show results for servers with 4 and more network cards Popup hints for servers now allow to enter more symbols A network from a specifiс range of IP addresses could not be selected on a server creation form Only one drop-down list with CPU now opens on a server edit form. New field: "Number of CPU" The panel now supports UPS handlers A UPS will show a notification to a server administrator, if the input voltage drops below 100 volt When you modify a platform, the amount of RAM will be adjusted according to the limit. You cannot allocate less RAM, if servers with larger amount are registered in the system IPv4 could not be allocated after installation of an operating system, if IPv6 were also registered in the system Enable/disable buttons in the list of VLAN members were re-arranged. New hints were added to ports' statuses Added more information into the banner that opens when trying to add more RAM to a server that it is allowed by its platform RAM is now defined correctly during diagnostics, if dmidecode doesn't show information on RAM Fields with CPU, HDD, RAM specified were reset when changing the platform type from "Common server" to "Chassis for blade-servers" The "Hardware issues" icon is displayed in the list of switches and PDU, as well as in the list of ports, if there are servers located in other racks "User" is now a required field on an IPMI creation form with automatic allocation of IP address HDD, CPU, RAM, PCI fields on a server edit form will display depending on whether its configuration is selected or not In the "Global settings" module you can select a range from which an IP address will be allocated to IPMI Fixed the bug that occurred when changing port speed and duplex on Huawei switches. Fixed a number of brocade ISX bugs SNMP port Modified the maximum value of a port number for SNMP notifications. Port 162 is set by default Fixed the bug with an invalid IP address of a Samba server, when installing Windows on locations Port aggregation When adding a new switch with port aggregation, existing ports were not displayed Trunk management "All VLAN" could not be selected in trunk members on a switch port Group operations with servers "Hostname" is now an optional field for group installation of operating system List of racks A column with locations has been added into the list of racks ISO upload The "ISO-images" menu won't be displayed to a user, if images are not present or the user cannot upload them. The "ISO upload" menu won't be displayed to the user, if he doesn't have permissions to use this feature Arista switches Introduced support of Arista switches Spare parts A spare part creation day is now displayed in the History Spare parts A delivery document number can be specified for spare parts Hard drives CT1024MX200SSD1 was cut in names such as Crucial_CT1024MX200SSD, VLAN in the list of ports VLAN in no longer displayed in the list of ports for Cisco Small Business and SNMP v2 Port aggregation Buttons for ports aggregation were not displayed HDD type Now HDD type is not changed after diagnostics, if the system already knows about that HDD CPU Added sockets for CPU Spare parts Clicking the banner will download a CSV file with serial numbers Changes in VPU. Now only one IP address is used for internal needs Burstable. Fixed calculation of Burstable channel load in the trafficburstable_day function. 95% percentile is now used correctly. The data that BILLmanager used for calculating chanel load, were not displayed in DCImanager Server configuration The system will run a check when changing server's platform. Enlarged the maximum number of HDD in a platform Custom ISO-images Custom ISO-images are now supported https://doc.ispsystem.com/index.php/ISO_images Integration with BILLmanager. API now contains the "Configuration" field rather than "Server type". This allows not to specify OldServerType Databases Enlarged the size of the trunk_members field in the switch_ports table. Small size didn't allow to add ports with a large number of VLANs DHCP on Centos 7 "systemctl daemon-reload" was not displayed when modifying a list of interfaces where DHCP is running Channel load Units of measure are now displayed correctly Information about mismatches in server connections More comprehensive information about what will be corrected is now displayed to users Server configuration Current information about a platform is now displayed for new server types MAC-address is found on a different port When DCImanager is trying to resolve the issue "MAC-address is found on a different port", PDU connection to an old rack is removed Statistics If statistics was collected for one hour, it was displayed for the following periods: current day and week, previous day and week "Go" button When selecting several records in the list of servers and users, the "Go" button was disabled The "Web-interface URL" field will be hidden if you enable proxying options Configuration for BILLmanager An HDD type in configuration for BILLmanager is now displayed in a human readable format The "Server has hardware issues" field is no longer displayed to users Dependent lists Port mode now depends on speed Configuration tasks Platform creation is added into the "Configuration tasks" PDU handler Eaton ePDU handler is now supported Changes for IPMI Supermicro 9.02 Fixed the bug that occurred when creating a new IPMI Supermicro 9.02 user Port aggregation in switches The button was displayed in modules where it was not supposed to be used Changes for old server types The "Platform type" field is not required for old server types Changes for servers Server status was not changed in DCImanager after it was changed in the IPMI interface ip * in ihttpd.conf is now processed correctly Recipes were not available to users Changes for IPMI users Users in iLO are now created correctly Fixes for IPMI When you disable proxying for IPMI, the file with required data will be deleted Changes to server filters The "Platform type" field was available in the filter form on the User level List of racks In the "Racks" module the network load is displayed in "bit/sec" Tasks Hardware management tasks could not start in some situations Changes to the server field The "Server equipment issues" field is added for "Chassis for blade-servers" server/platform type Changes to Bird.conf IPv6 will be ignored for Bird.conf "Parent chassis" field The "Parent chassis" was displayed when creating a blade server Server fields "Platform type" is now a required field IPMI proxy "manager" will be deleted from the URL if IPMI proxying is configured Changes for IPMI Link to PMI will be re-created when changing a password for the server owner. A user who cannot use that IPMI won't be available to access it Changes in the Servers filter The "Server type" field is not displayed unless you add the Option OldServerType option. You can now filter the list of servers by the 'Platform type" field "CPU performance" The CPU performance" field is removed from the server edit form IPMI parameters New fields on the IPMI configuration form: "Enable proxying for IPMI", "Private", "Web-interface URL". SSD drive In some situations SSD drives were defined incorrectly LOCATIONIP macro MGR_IP is added into LOCATIONIP during OS deployment, if the remote location is missing Hide password Password is now hidden on the IPMI and Intel AMT connection forms New macros for OS setup templates LOCATIONIP - location IP address, IPv4ALIASES - IPv4 aliases of the server, IPv6ALIASES - IPv6 aliases Changes in filter in the list of server In the "Status" field you can select the following statuses: "Server is blocked", "Server is protected", "Server equipment issues" Diagnostics results for old types When you add Option OldDiag into the DCImanager configuration file, results of the diagnostics will be processed regardless old server types Changes in the server configuration form Fixed bugs that occurred in the hard drives configuration form Changes in the "Operations" form Now the list of operation depend on installed templates Corrected field validators in the server edit form Changes in the list of servers Buttons behaviour is modified according to server's statuses Introduced support of APC9320 device for environment monitoring A number of improvements was made in the "Temperature" module Modified the validator for the "Price" field Statistics. Report: "Current consumption" Modified column names Server configuration form PCI-devices cannot be added into the "Configuration" tab, if the server doesn't have hardware RAID Show the reminder when user selects OS installation over network A recipe name will be shown during its setup on the server A number of improvements are made in locations with NFS, SAMBA, DHCP servers Changes in filters in the Servers module <a href="http://doc.ispsystem.com/index.php/Filters_in_the_list_of_servers"></a> Changes in the "Statistics" module The "Traffic" report now generates more quickly Changes in "APC PDU 7xxx (SNMP)" Dublicated load bug was fixed for APC 7941 Changes in the server edit form Racks management Rack height (in units) is specified in the rack. The "Racks types" module is no longer used Changes in IPMI configuration during server diagnostics If you set autoconfiguration of IPMI, all users will be deleted, and a new user with default password will be created Changes to IPMI users management Connection to IPMI won't broke when changing user password to IPMI Changes in the "Chassis" module "Chassis" is renamed into "Platform" Fixes in the list of servers Added pop-up hints for all columns Server racks When changing a server rack, provided that devices are connected to that rack, you will see a additional form where you can select a required operation: "Delete" or "Do not delete" (only if admin selects the check "Allow to use different racks for equipment") Changes in web-interface Fixed a number of bugs in the "Switches", "PDU", and "UPS" modules. A number of changes is made to locations: non-standard SSH port, incorrect installation on CentOS 7 Filters in the list of servers The "Configuration" field now opens as a drop-down list Server diagnostics tool Fixed an issue with the "Server has problems with its equipment" check box. <a href="http://doc.ispsystem.com/index.php/DCImanager_server_diagnostics"></a> "Hard drives" module The "Type" drop-down menu now contains correct values when editing hard drives Changes in Juniper The Half-Duplex mode is now longer available in the port edit form "Server has hardware issues" check box is selected for old server types. The system didn't check correspondence between equipment and chassis type for "Multi-node" servers Changed server editing form The "hostname" field has status "unnecessary" Fixed the handler Juniper (Netconf) Now, statistics are collected for the XE and AE interfaces Fixed a bug with server type convertation <a href="http://doc.ispsystem.com/index.php/How_to_convert_server_types_in_DCImanager"></a> Encrypted passwords for IPMI Passwords for IPMI are now encrypted in database DC map is improved When changed server placement in a rack, new unit number is displayed in server editing form. The IPMI user creation procedure has changed By IPMI user creation access levels for DELL iDrac will also be customized. Edited "Server diagnostics" operation process Edited conditions of putting "Server has hardware problems" checkbox. <a href="http://doc.ispsystem.ru/index.php/ Server_diagnostics_in_DCImanager"></a> Server management options There is no need to "disassemble" server when you want to move it into maintenance mode or cancel it. Its spare parts will be attached to that server. Data center map You can now delete walls CPU sockets are no longer supported Bug in templates When you add the ($SHAREDIR_FILE)subdir/file.1 macro, you can get the file.1 located in the directory, which is specified as sharedir (it is added in metainfo.xml), from the subdir subdirectory Hard drive type Added new rules for identifying hard drives' SDD New handler for APC rPDU 79xx Energy usage statistics can be now collected from APC rPDU 79xx. Data is collected from socket strips Enhancements to server diagnostics procedure If hardware raid was defined during diagnostics, and HDD cannot be defined, HDD that have been already assigned to the server won't be deleted. If no HDD were assigned to the server, you will need to add hard drives manually Recipes for users Control panel's users can create and use recipes <a href="http://doc.ispsystem.com/index.php/Recipes:_Technical_details"></a> Error installing Windows2012 Fixed network disk connection A number of improvments are made to the "Bandwidth usage" report Add IPMI during diagnostics If an error occurs during IPMI configuration, IPMI won't be added Creation of locations Added description of errors that may occur during creation of locations. If the control panel failed to create a location, you won't need to create it again Importing IP addresses between servers Fixed import of IP addresses between servers. Modified the interface of DCImanager Essential Introduces support of Cisco Catalyst 45хх (including Cisco 4948) New IOS Cisco 4948 uses new procedures in order to define speed, duplex on port, and to get/set VLAN Data collection from IPMI Information was not collected from IPMI Access to recipes In the "Recipes" module -- "Properties" you can restrict access to recipes You no longer need to specify an activation key for Windows templates manually in a template. You can simply enter it in the template's parameters form via web-interface IPMI (lanplus) Fixed a bug that occurred when trying to unblock an active server CPU high load The error occurred when collecting statistics and requesting statuses from connected devices simultaneously CISCO handlers Fixed a bug that occurred when collecting MAC-addresses from device ports Interface for chassis management New icons for multi-unit servers (2,3 and more). A number of changes are made to the list of chassis types: up-to-date information and number of servers of a certain type are displayed for every chassis Server diagnostics bug Name of the RAID controller was specified in the "Configuration" field during diagnostics Delete user comments User comments will be deleted during server release (owner status will change to "without owner") Changes to DCImanager Enterprise licensing policy The licensing policy is now based on the number of racks Processor name was missing in configuration This bug occurred while editing a server, if processor socket was different from the one selected in the chassis type List of servers List of servers opened incorrectly, as the control panel referred to non-existing database field Incorrect statistics collection Statistics is now collected correctly. This bug occurred on high-load switches Server diagnostics Fixed a bug that occurred when running server diagnostics Recipe bug Recipes can be used only for operations "Install OS" DLINK-3200-28 DLINK-3200-28 HardwareVersion: C1 switch is now supported by the control panel OS templates installation bug OS template installation/re-installation mechanism was changed in version 5.57 Support of Dlink-DES-3200-28 Introduced support of switch Dlink-DES-3200-28. It supports all basic operations: statistics collection, speed/duplex management New global policy A new global policy enables to use different racks for equipment. Server can be connected to switch or PDU from any rack ResetAPCTimeOut for the APC handler The ResetAPCTimeOut parameter in the configuration file specifies a timeout in milliseconds between disabling and enabling controlled socket when performing reboot. Huawei switches Added support for Huawei switches OS reinstllation When reinstalling OS with user permissions, the OS template that was used in previous setup/reinstallation will be available to that user even if the access is restricted Global search The global search can be performed by switches and PDU Clicking the "Create IPMI" button will automatically allocate an IP address in the Server connections module SNMP Common V2 Added a new handler for switches Server search with the ExternalIpAllocation option activated If the ExternalIpAllocation option is set, clicking "Approve" will add the server to the list without IP address Global search Global search can be performed by the following fields: MAC-address, IP-address, Label, Hostname Locations. Password-based authentication Password-based authentication is now available for locations creation Server types When installing and updating the control panel (if no server types are cretaed), the "Server types" module and other element associated with server types will be hidden. To return the elements, specify the Option OldServerType in the configuration file TODO block on Dashboard Added a new TODO block on the Dashboard for administrators that includes steps an administrator needs to perform for initial setup of the control panel upon installation. Once completing all tasks, the block will be hidden Server release A server will be unblocked after release Error cancelling operation In some situations an operation couldn't be cancelled Community in equipment You can enter any value in the Community field when connecting to SNMP New report in the Statistics module Added the Channel load module, where you can view detailed traffic information - avg bps (average), max bps (maximum), metered 95% (burstable in/out), metered 95% (burstable summary in+out) per each server. You can get statistics over a desired period during the current month. Traffic statistics You can view statistics per server from a certain rack Custom handlers You can configure ports as a trunk and add trunk members in custom switch handler Diagnostics notification Added more information into the hint describing a local connection test User statistics Incoming and outcoming traffic statistics is returned and added to the item "Traffic". List of trunk members in VLAN Ports in the trunk mode are highlighted red. Ports can be disabled in the access mode Locations You can now manage servers in different locations. For more information, please refer to http://en.5.ispdoc.com/index.php/Locations_in_DCImanager Cascading switches In the port edit form you can now add connection to port of another switch Server connection Added possibility to create a connection of the type Server->Server New mechanism for server types For more details refer to our Documentation http://en.5.ispdoc.com/index.php/How_to_convert_server_types_in_DCImanager Servers under repair You can keep track of servers being under repair History of IP address change You can keep track of creation and deletion of IP addresses in the Server history module You can always choose a type of IP address for the server Half-duplex in Juniper The no-flow-control option will be specified when switching port to half-duplex in Juniper Server history Server history now includes information about its suspension, activation and reboot Statistics module The "Total traffic" module in now available in "Statistics" displaying information about total traffic from all switches over a selected period Server type in deactivated servers. Column "Server type" is added to the list of deactivated servers. History of server blocks You can keep track of server blocks in the History module New PDU handler. Added Racktivity PDU handler. Typo in devices Corrected a typo in Intel AMT Notifications on Dashboard (User level) Fixed the traffic graph heading Statistics The "Load" module is now available enabling to view load statistics from all switch ports Operations (User level) Now users cannot see the operation status (diagnostics, recovery mode, OS installation) in the "Status" column, if the operation was run by Administrator. A user can see the corresponding icon in the "Status" column indicating that the server currently undergoing maintenance. The "Edit", "Reboot", "Enable", "Disable", and "Operations" won't be available to users at that time. User comments Admins can view both his and his users' comments in the list of servers Fixes in Netflow statistics processing module Sometimes nfacctd can write files with odd symbols at the end, which do not correspond with the file format, in var/flow. Due to incorrect processing of such files they were not deleted from var/flow, statistics was collected incorrectly, and the disk space consumed by var/stat was increasing. Such files are being processed correctly now. Incoming (Mbit/s) Select a day in the format YYYY-MM-DD to generate a report Outgoing (Mbit/s) Day Intel AMT IP address Username to Intel AMT Enter the port of the Intel AMT web-interface. Leaving the field blank will use port 16992 IP address of the Intel AMT interface Password Password to Intel AMT Port User Intel AMT settings Copy the server type Select how many servers with maximum power usage to show TOP server by energy Filter the server's list by the selected rack Incoming traffic Traffic per server Total Traffic statistics Incoming Traffic statistics Outgoing Filter the server's list by the selected rack Statistics will be shown only for the server with this label (name) Statistics will be shown only for servers with this IP address Write off servers Configuration Written off and broken servers Date Server is restored The server is written off Server has been rebooted Server connection is disabled: __new__ Server connection is enabled: __new__ Server has been disabled Server has been activated Server has been rebooted The "Server broken" check box was selected Moved into maintenance mode IP address has been added: __new__ Moved back from maintenance mode IP address has been deleted: __new__ The "Server broken" check box was unselected The "Server protected" check box is selected Server is blocked The "Server protected" check box is cleared Server is unblocked Performing operation with template: __new__ Cancell operation with template: __new__ Traffic from all the servers for the last 30 days Traffic statistics Total traffic Total power consumption Power use by all servers in the data center Consumption (Amps*hw) Power consumption statistics 主机名 IP address Server Current statistics Consumption (Amps*hw) Power consumption Power consumption statistics Consumption (Amps*hw) Current statistics Power consumption by the __server__ server Current detailed statistics Server Equipment with this barcode is already created in the warehouse. Equipment with this serial number is already created in the warehouse. Failed to generate the report. Error '__value__' Report id '__value__' does not exist Impossible to launch automatic IPMI setting because operation '__value__' is already ongoing IPMI rest command not executed. Reason: '__value__' Unsupported operating system '__value__' The unit number is already used in the rack or chassis for blade servers: conflicting servers/equipment (__value__) Report is not ready The server and the switch must be located in one rack. Or enable the "Allow to use different racks for equipment" option in the 'Global settings' section. Notifications cannot be sent. Navigate to the "Mail notifications" section to configure the external mail servers. You should also specify the email for every user (in the user settings form) who will receive the notifications and confirm the email address. You cannot delete the trigger that belongs to another user Script '__script__' already exists or belongs to another user Trigger for deletion not found Insufficient space in the rack for equipment. IPMI user password too long (passwords that are more than 15 symbols long may work incorrectly) Changing server size will lead to conflict of __value__ server unit number with the neighboring servers. Unable to reboot DHCP. Probably, you specified incorrect settings. Example: If a network interface has a few IP addresses and one of them is already used by the control panel e.g. for OS installation, you will not be able to set up server search for the second one and specify vlan or interface. Read more in our server search documentation. The '__value__' file does not exist Incorrect image file name: '__value__' (the extension must be iso) Cannot connect to IPMI: '__value__' This IPMI doesn't support upload of the console (the jnlp file) via ihttpd Statistics for '__value__' is not present The platform cannot be selected, as the number of __value__ slots is less than in the server configuration Invalid "Platform type". Select a "Platform type" if you want to add equipment into the server No available spare parts for this server. Add required spare parts in the "Warehouse" module -- "Delivery", or in the "Equipment" module and try again Exceeded the number of __object__ slots specified in the platform settings '__platform__'. Limit: __value__ CPU socket selected in the platform does not match the CPU socket in the servers with the following id: __value__ You cannot use different CPU types in one server The number of __type__ slots cannot be less than in the configuration of servers with the following id: __value__ Cannot close the delivery if it includes "Pending" equipment Target status of the equipment matches the current Cannot change the delivery status as this equipment is placed into a rack, server, or switch CPU socket in the selected platform does not match the CPU socket in the selected server You cannot change the delivery status as the delivery with this equipment is already closed Cannot change the status if the equipment is not in the warehouse, not under maintenance, or not broken Equipment category not selected PCI You have insufficient privileges for managing the "Warehouse" module RAM HDD CPU Cannot complete the operation with port(s) '__ports__' Cannot complete the '__func__' function IPMI console cannot be downloaded Cannot restore IPMI session. Please apply to your administrator. You have no access to downloading IPMI console. Please apply to your administrator. This type of IPMI does not support console downloading (jnlp file) Empty parameters are sent Server search is already enabled for IP address '__value__' Server search is already enabled for this combination location/interface '__value__' IP address is not found Interface name contains invalid symbol '__value__' IP address '__addr__' is not created on the interface '__iface__' Failed to set up Java on proxy server: '__value__' Failed to set up curl on proxy server: '__value__' Operating systems of locations and DCImanager do not match Location with this address already exists Installation script (installation of NFS utilities) failed with error: '__value__' Error '__value__' occurred during reduction of ISO usage counter This user doesn't have permissions to select proxy methods. Please, contact DCImanager administrator IPMI URL (__value__) of the selected server is not available. Please recheck URL/IP in IPMI connection properties and Firewall rules on the DCImanager server No active IPMI associated with this server Custom switch handler returned VLAN ID = '__value__' , which is not created in DCImanager Connect to IPMI proxy server failed. Please provide a key or a password Connecting to IPMI proxy server failed: 'Please check proxy server parameters' Disconnection of IPMI proxy server caused issue: '__value__' Installation script (firewall exclusion configuration ) failed: '__value__' Installation script (jnlp-files activation configuration) failed: '__value__' Connecting to IPMI proxy server caused issue. Script output: '__value__' Installation script (creating user from a template) failed: '__value__' Please accept Java/Oracle(c) terms of service for using IPMI proxying Installation script (browser installation) failed: '__value__' IPMI proxy server connection failed: '__value__' IPMI proxy activation is failed: please check server connection parameters Installation script (VNC-server installation) failed: '__value__' Background task ID generation failed: 'Couldn't find a free port for IPMI connection' Parameter '__value__' not found while reading panel configuration file Installation script (java installation) failed: '__value__' IPMI proxy activation caused issue: '__value__' Invalid noVNC ports range in cofiguration file: '__value__' Changing permissions for autorun file failed: '__value__' Connecting to IPMI proxy server failed (firewall configuration issue: '__value__') Cannot start "__object__": __value__ Cannot start "__object__": __value__ CPU number cannot exceed the value specified in the platform (__value__) The value can contain only the Latin alphabet letters, digits, -, _ and cannot start with a digit or - The amount of RAM on the server cannot exceed the value specified for the server platform type (__value__Gb) Amount of RAM cannot be less than the value specified in the configuration of servers: __value__ Arista eAPI returned the error: __value__ Unable to login to Arista eAPI. Invalid username or password File is too large. Maximum file size - __value__ Gb You cannot upload the ISO-image. The maximum limit is exceeded, or you have insufficient permissions to execute this operation A standard template for the ISO-image is not found. You can upload it in OS templates Only the owner can delete this ISO-image This limit cannot be set. A number of users already use many ISO-images. Recommended value = __value__ The range of IP addresses should be separated by a hyphen Server IP address for server search should not be included into the range of IP addresses IP range and server IP address should be from the same network User amount limit is reached, delete the unnecessary users or use existing users. Server is not connected to power source. Operations cannot be performed. Please, contact your server administrator No access via IPMI First remove all the hard disks of this type The maximum number of tasks for this equipment has been exceeded This operation is already running, or is in the queue Cannot change server rack with switches and PDU connected. Delete all connections and try again You need to specify the parent platform when adding a new blade server Negative unit value. Units override the rack, please check equipment size. Please note that if size of equipment exceeds one unit - you need to specify the number of upper unit in "Unit number" field. Cannot return server/spare part with serial number __serial__, as it is already in stock You cannot install less servers than already installed in the platform of the selected type Unit number (blade server position) exceeds the enclosure Cannot write off server __serial__ as it has spare parts. Remove all the spare parts with the "Set/Remove" button No free space in the selected parent chassis. Select another chassis or clean space in the selected one __value__ spare part not found This WWN is already assigned to server or spare part You cannot specify several barcodes for one component Spare part type with this barcode is not found Server/spare part with serial number __serial__ has the status "Destroyed/Input error". You cannot return a server/spare part with such a status Cannot mark the detail as broken, if it is located in the server, switch, or other device. You will first need to remove it The'__value__' server is already installed into the selected unit An error occurred when starting NetFlow: __value__ Please enter the right VLAN ID in VLAN or Native VLAN field. VLAN ID should represent the number from 1 to 4095. An incorrect type was detected for the IP address being added, while processing the AddIpToPort option. Please state the type in the IP address database (within IPmanager, if an integration is in place), in the vlanX format, where X is a value greater than 0 and less than 4096. Alternatively, remove the AddIpVlanToPort option. AddIpVlanToPort option handler cannot add VLAN-IP address to the switch's port, as an operation is running on the server, and the policy to "Switch VLAN during operations" is turned off. Please wait for the operation to end. VLAN __value__ has different status (PVLAN status - Primary, Isolated) on the switches. Its use is thus prohibited. Please make sure that this VLAN has the same status type on all the switches. SSH access is required Telnet access is required Wrong VLAN ID in trunk members. VLAN ID should represent the number from 1 to 4095. All the aggegated ports should have the same VLAN tag Bad primary port Wrong VLAN ID. VLAN ID should represent the number from 1 to 4095 It's impossible to aggregate uplink ports SNMP access is required You cannot modify the value '__value__' OS templates are currently being deployed This server already exists Failed to install packages on locations Cannot delete the platform, as it is already used in servers and/or delivery Impossible to delete HDD as it is already used in servers and/or delivery Such connection between switches already exists Failed to connect to location via SSH: __value__ Cannot delete PCI device as it is already used in servers and/or delivery Operation system is not supported Failed to generate an SHH key Failed to read public SSH key from file __value__ Impossible to delete CPU socket as it is already used on servers Server not found Cannot delete the CPU as it is already used in servers and/or delivery Such connection already exists Currently you cannot perform any operations with this server. The server is undergoing maintenance Server is not marked Broken You cannot modify mode on the UpLink port You cannot modify speed on the UpLink port You cannot modify VLAN on the UpLink port This unit is already in use in the rack or platform for blade servers The unit number is larger than the rack size or number of slots in the platform for blade servers You have reached the maximum number of racks you are allowed to use according to your license You cannot delete the supplier who has servers and/or equipment Cannot disable the server without owner The value must contain only the Latin alphabet letters, digits and the '-' sign. VLAN ID value must be within the range: __ranges__ VLAN ID must be numeric You are not allowed to edit this IP address as this is the temporary address and will be delete automatically Server access denied Server access denied Failed to add VLAN __value__ into Trunk Failed to change VLAN __value__ on port Failed to delete VLAN __value__ from Trunk Failed to start the Bird service Failed to allocate temporary IPv4 to complete the operation Failed to run check of OS templates on the chassis for blade-servers It is prohibited to move the primary IP address of the server Unable to delete the category. Spare parts associated with this category exist Failed to change the hostname if IP address is not assigned Select a server Select a server or rack Failed to delete the network. This network is already in use Failed to delete the selected rack, first delete servers and devices in that rack Cannot delete the rack type. First you need to delete all the rack with this type Unable to delete this category. Spare parts or types associated with this category exist Unable to delete the selected type. Spare parts associated with this type exist Cannot delete the selected server type. Servers of this type exist Cannot delete the selected VLAN, as it is already in use This element is not editable This device doesn't support the required functionality The selected device doesn't have available ports This name is already in use by a measuring device This name is already in use by a PDU This name is already in use by a router This name is already in use by the switch This name is already in use by an UPS Port with this ID already exists This with this IP address already exists Rack with this name already exists This supplier already exists Server with this MAC-address already exists This category already exists This type already exists IPMI already connected to this server Server type with this name already exists User with this name already exists Virtual network with this VLAN ID already exists on the router Virtual network with this name already exists Virtual network already exists Netconf: failed to connect with this loagin/passowrd Netconf: failed to connect with this password Netconf: failed to open the SSH channel Netconf: failed to complete Handshake Netconf: failed to initialize the SSH function Netconf: invalid host Netconf: failed to open the SSH session Netconf: failed to connect to socket Netconf: failed to enable the netconf subsystem Error generating the authentication key Error generating the private key Failed to open the SNMP session Cannot define the SNMP version Failed to SSH connect to the device Failed to Telnet connect to the device An error occurred while trying to connect to the device. Make sure the access details are correct, and the device is accessible Failed to allocate IP addresses for the server. No IP addresses available Unable to delete this IP address. Server diagnostics is in progress and the IP address might be in use Unable to delete this IP address. The OS installation is progress, and the IP address might be in use already Unable to delete this IP address. Server recovery is in progress and the IP address might be in use This IP address is already in use and cannot be removed Cannot transfer the selected IP address: server diagnostics in progress, the IP address may be in use Cannot transfer the selected IP address: the OS installation in progress, the IP address may be in use Cannot transfer the selected IP address: server recovery in progress, the IP address may be in use Error occurred when sending request to IPMI "__value__" Selected license is not compatible with this version. The license can be used for __value__, the installed version in DCImanager Enterprise Selected license is not compatible with this version. The license can be used for __value__, the installed version in DCImanager Essential Selected license is not compatible with this version. The license can be used for __value__, the installed version in DCImanager Progressive MAC-address is not specified for this server Unknown connection Unknown device type Unknown device You specified the server, which is a platform for blade-servers. You cannot move hard drives to/from platform for blade-servers No templates available to complete this operation. Contact your administrator No operations can be performed with this server. Contact your administrator Unable to delete the CPU, as there are no CPU in the database. DCImanager automatically adds CPU to the base while running server diagnostics. Device not selected No IP addresses available in the VPU etwork Failed to run check for OS templates for all the server types. No check templates available. Install the OS templates. Note: templates that are available only to administrators won't be checked automatically No devices are connected to this PDU No servers of this type to start checking This user account is suspended Cannot perform operations with platform for the blade servers OS installation in progress. The selected server cannot be deleted. Cancel the installation process Unbale to complete the operation. No IP addresses are specified for this server Unable to add an OS template to the list, as no templates are installed. Install the OS templates (Settings -> OS templates) Unable to upload the file __location__. Make sure the link is correct, and the repository server is accessible. The __filename__ file is not found in the repository, or its contents differ from '__content__' Update the control panel to __value__ or later to be able to install or update the template PrefixLowBorder parameter is not found in the configuration file The Bird service could not apply the configuration file settings The __repo__ repository is blocked by another process Router for synchronization not found You cannot delete your account You cannot suspend your account You cannot enable your account Supplier with this name already exists This server is protected from accidental actions by administrator This server is blocked by administrator You have exceeded the maximum number of servers that you are allowed to create according to your license This port is assigned to the server an cannot be used for other purposes You must not change the type of the spare category that already exists Select a server Select a server or spare part Select a spare type. To add new spares, go to the Spares module - Categories and add required categories and spare parts. Blade servers are already installed into the chassis. The chassis cannot be deleted This port is assigned to the server and cannot be used as Uplink Netconf: failed to execute the test command on device : __value__ You should enter a range of IP addresses, such as "192.168.0.10-192.168.0.50". It shouldn't include special addresses (RFC 5735, 919, 1700, 5771) and IP address of the server interface where DCImanager is installed. You have selected incorrect OS template You have selected incorrect recovery template Select a type This VLAN is associated with the server "__value__", and its network cannot be released Cannot release the selected IP address as it is assigned to VLAN You can add and edit networks only with VPU activated No devices connected to this device. Select how you want to connected it (SSH, telnet, SNMP) and enter required information Cannot clone '__count__' triggers Interfaces for DHCP are not specified. Server search may run incorrectly. You can specify them in the Global settings form This delivery is "Closed". Any changes to the equipment are forbidden Cannot change the status into "Cancelled" for __count__ element(-s). For more information, please hover the mouse cursor to the error icon in the table Cannot change the status into "Received" for __count__ element(-s). For more information, please hover the mouse cursor to the error icon in the table The list of IPMI users were updated __time__ The list of IPMI users has not been updated for a long time Connection failed. Displayed data may be incorrect You have CPU, for which scalability is not specified You have CPU, which are not associated with sockets This operation is already running or put into the queue Note: you have reached the maximum number of racks you are allowed to use according to your license Failed to bring into operation __count__ server(s). Move your mouse cursor over the error icon for more detail. Failed to test OS templates for __count__ type(s). Move your mouse cursor over the error icon for more details Failed to suspend __count__ element(s). For more information move you mouse cursor over the error icon. Failed to block __count__ element(s). Move your mouse cursor over the error icon for more information Failed to install __count__ template(s). For more information hover your mouse cursor over the error icon Cannot activate __count__ port(s). Move your mouse cursor over the error icon to learn more Cannot activate __count__ port(s). Move your mouse cursor over the error icon to learn more Failed to stop operations on __count__ server(s). For more information move your mouse cursor over the error icon. Failed to power off __count__ server(s). For more information move your mouse cursor over the error icon in the table Failed to power on __count__ server(s). For more information move your mouse cursor over the error icon in the table. Failed to reboot __count__ server(s). For more information move your mouse cursor over the error icon in the table Attention! You have exceeded the number of servers that you are allowed to use according to your software license NetFlow report Triggers History Energy consumption Network Temperature Warehouse Equipment RAM VLAN ISO镜像文件 Inventory Types of equipment WWN Barcodes Spare parts Delivery Recipes Burstable Switch Load Locations Total traffic PCI devices Platforms Processors HDDs Inventory Burstable Power consumption Broken servers Traffic Total traffic Burstable You are using a free version. It comes with the following limitations: 5 servers Power consumption Orders DC map Equipment Global settings Move hard drives Search equipment Reports KVM Main Menu Units of measure Networks Operations OS installations OS templates PDU Policy Power consumption Purchased equipment Racks Temperature Routers 服务器 Fixed connections Found servers Server types Spares SSH密匙对 状态 Statistics Switches Tasks Temperature Tools Traffic Traffic (Burstable) Problems UPS Users Virtual networks (VLAN) Location Data center in which the rack is located Height Enter the rack height in mm Places for servers Places for servers Number of servers that can be installed into the rack, for each server you need: one switch port, one PDU port and one unit Number of servers that can be installed into the rack, for each server you need: one switch port, one PDU port and one unit Servers search is not allowed for this rack Servers search is allowed for this rack Here you can view the information about servers installed in racks/available locations. Clicking the table cell will redirect you to a list of servers in the selected rack. Network load from all the devices that are installed into the rack for the last 5 minutes List of rack types Switch ports Power consumption (W) Power port Rack size Number of servers Types of racks Temperature Racks management Network load Height (unit) Enter the rack height in mm Location Data center in which the rack is located Enter the name or id of the rack Enter any additional information related to the rack Number of locations in the rack (in units) Selecting this check box will enable DCImanager to use equipment installed in this rack for server search. During this process DCImanager will enable available ports one after another on the PDU without marking them as "Services", and run server connection check. These operations will define PDU ports that servers are connected to. Rack size Size of the service equipment Allow server search Edit rack Add a rack IPMI IP address is being changed This server has equipment issues: __value__ Clear disks 服务器处在维护状态。您不能做任何操作 Server is written off. No operation can be performed Server is broken. You cannot perform any operations Server is created by mistake. You cannot perform any operations There are spare parts that are not registered in the warehouse Mismatching equipment found during diagnostics. New or wrong equipment found. Open the server edit form to resolve the issue 正取消操作,请等待 下载IPMI控制台启动文件(仅.jnlp文件) . Username/Password: IPMI控制台 Hidden switch port __value__ - cable is connected List of connections to the switch Hidden switch port __value__ - no connection Hidden switch port __value__ - status unknown 网络连接 Connection with the __value__ switch failed Upload from ISO-image __value__ Number of server's IP addresses 当前服务器运行状态 Power consumption (Watt) over the last 5 minutes 主IP地址 Notes Platform type Server type Temperature on the server Installed OS Server owner Server configuration MAC-address of the primary interface 机柜 标签 You need to select hard drives manually. Hardware Raid is installed on your server, that's why information about hard drives cannot be obtained Failed to complete the last operation. If the error occurs again, contact your administrator Error processing the recipe. Click the icon for more information Delivery associated with this server Blade server Common server 状态 Common server Common server All connections will be removed, server's IP addresses will be deleted, owner will be reset, and statistics will be deleted. The server will be put into the list of written off servers In service Write off Platform type Common server Chassis for blade servers Delivery Recipe installation in progress: __value__ Type name 标签 Currently you cannot run any operations on this server. The server is undergoing maintenance Configuration Clicking Delivered will delete the "Broken" status and delete the server from the list of servers displayed to operators. Sent Do you really want to mark this server delivered Mark this server "Under maintenance" Under maintenance Server is broken Delivered Do you really want to move this server into maintenance mode Maintenance The server is written off You will be redirected to the "Operations with equipment" module Number of IP addresses Devices connected to the selected server Delete the selected server Deny access to the selected server. Switch port will be disabled Edit properties of the selected server Allow access to the selected server. Switch port and power supply will be enabled Server configuration View and manage IP addresses assigned to the selected server Add a new server 请选择操作项 取消当前操作 Do you really want to cancel the operation that is currently running on the server Blade server Platform for blade servers Common server Server diagnostics __value__ The server is blocked by administrator This server is protected from accidental actions by administrator Server equipment issues Connection with the __value__ switch failed __value__switch port - no connection __value__ switch port - cable connected Switch port - unknown status __value__ OS installation __value__ 打开 __value__ 的web控制台 本次操作失败,如果再次发生,请联系管理员。 连接 __value__ 失败 __value__ 端口 - 已禁用 __value__ 端口 - 已连接 PDU port - unknown status __value__ 急救系统 __value__ SSH已准备好连接 __value__ VNC已准备好连接 __value__ 急救系统运行中 急救系统运行中 为选中的服务器关机 为选中的服务器开机 为选中的服务器重启 最近5分钟的流量使用情况 (prevailing type) Id 网卡MAC地址 您确定取消当前操作项吗 您确定要删除吗 Do you really want to block the server Do you really want to unblock the server 您确定取消当前服务器的操作项吗 您确定要关机吗 您确定要开机吗 您确定要重启机子吗 操作系统 Power consumption (Watt) Connections Lock Unlock Info IP地址 操作项 取消 关机 开机 重启 温度 服务器 流量 Server type VLAN Written off Search parameters through OR (except for Status) Operational in repair 状态 Input error Broken Search parameters through OR To From Server filter No Yes Server equipment issues Server is protected Server is blocked Connected to PDU Connected to switch Connected to Id IPMI IP address MAC-address Label OS Server type VLAN Model <font color="red"><i>Old server types are no longer supported. Please use new platforms</i></font> Use a server type for location With this option selected, data for old server types will be used for locating the server in the rack Here you can see the information about the issues that were found during the diagnostics procedure Detailed information about issues Information about server equipment (HDD, CPU, etc.) will be added here automatically during diagnostics. Amount of equipment of the given type did not coincide during diagnostics. It was not possible to detect automatically which part was missing, therefore you need to specify which parts to extract. Amount of parts of the given type found during diagnostics is: This equipment is not found during diagnostics. Confirm that you want to remove or replace it with the "Edit" and "Remove" buttons No available spare part '__value__' found in the warehouse In this list you can select a server from the warehouse, so the equipment from delivery will be associated with the newly created server Server from warehouse The sever contains several CPU types. Delete or edit them Equipment has been modified. Click "Ok" to apply the changes Add equipment Bar-code PCI HDD Equipment type Name Plug out 编辑 Serial number Action Platform model Enter the platform model of the selected server The selected platform type cannot contain an IP address. Please delete IP addresses from the list. CPU type installed in a server. DCImanager fills it in during diagnostics CPU The slot where the chassis are located The slot where the chassis are located Blade-slot Blade-slot The number of CPU in the server CPU number Alias IP addresses in the format 192.168.0.1/24 192.168.0.254 Enter the network mask Alias IP addresses Invalid network mask '__value__' Invalid network gateway '__value__' Invalid IP address '__value__' Add alias IP addresses Alias IP addresses in the format ip/mask gateway. Enter each IP address шт a new line IP address Network mask Enter the IP address RAM amount was not determined by diagnostics A platform type is not selected for this server Server location in data-center --without platform -- Server size in the rack (in units) Please enter a rack unit number.For multi-unit equipment enter the upper position. Parent chassis Obtain information about server size from the platform type Unit number Size according to platform type It allows to define the platform, where this blade server is located (depend on chosen rack) Size Server size in the rack (in units), according to its type Size Block server Block server During the diagnostics process information about server equipment (HDD, CPU, etc.) will be added into this module automatically. In the Name field a configuration name will be generated based on this data: E3-1240-v3-2x2000SATA. It can be used in invoices, if the panel is integrated with BILLmanager Attention! Selecting "Without owner" in the "Owner" field will run server diagnostics and delete all the data on hard drives. This behavior is set by two options "Check before releasing" and "Clear disks" and/or "Full hard drive erase" . You can set the options in the "Global settings" module A platform name for the selected server will be automatically generated based on CPU, HDD, PCI and other fields RAM (Gb) Platform type HDD __number__ Common server, blade, or platform for blade servers. It defines how much CPU, HDD and PCI can be added to server Type of HDD installed on server PCI __number__ RAM Device type in this PCI Processors Diagnostics results Name RAM memory installed on server Check the box to mark the server "Broken". An operator will see the status and move the server into maintenance mode. Server is broken Disk with serial number '__hdd__' has invalid parameter: __value__ SMART from the server's hard drives SMART Local connection speed is too low Measured connection speed Local connection speed (Mib/s) Unit number Enter the number of the unit in the rack. For several-unit equipment specify the upper position. Statistics collection Purchase information Delete hardware problem Number of cores Number of cores is more than specified in platform type CPU CPU number CPU Use VPU IP address Use NetFlow/IPFIX Protect server --Add new-- Configuration Number of hard drive does not correspond to the type Hard drives Hard drive performance does not correspond to the type Select how you want to collect traffic usage statistics The total number of cores installed on the server Type of CPU installed on the server Enter the number of CPU installed on the server Type of CPU installed on the server IP address for this server will be selected from the VPU network Select a desired IP address With this check box selected, all users including the administrator won't be able to perform operations over this server Information about the hard drives installed on the server This field contains additional information about issues with equipment that were detected during server diagnostics. Select the check box to indicate that this server is faulty and cannot be used. Enter the server identifier Enter an IP pool/type that will be used for this server Information about network adapters installed on the server Enter a MAC-address of the server network adapter. It is used for installing OS on the server IP address that will be assigned during OS installation Enter a motherboard installed on the server Enter a unique name for this server Enter a supplier name Enter additional information related to the server Operating system installed on the server The owner of this server. To select a user, start typing his name Select the platform where the server is installed Set the price for the server Select the date when the server was purchased Enter the rack where the server is installed Hardware RAID is installed on this server The amount of RAM (MiB) RAM performance in operatios per second Select a supplier of this server Enter the server's serial number Get information about server size from the server type Enter the IP address Server size in rack (in units) Size that this server occupies in the rack (in units). According to the type Choose a server type. Server types are used in DCImanager Essential to group servers (for example, by tariff plans). DCImanager Progressive and Enterprise keep information about hardware of servers of this type, and enable to determine problems with those servers Enter additional information about the server Select the VPU network for IP allocation Enter the warranty period in months Additional information about errors with equipment Server equipment issues Id IP pool/type IPv4 automatically IPv6 automatically Network adapters MAC-address 主要的IP地址 Motherboard Label --add new-- New supplier --no available platforms-- --without supplier-- --without type-- Operating system Platform server1.example.net 123.45.67.8 01:23:45:67:89:AB Server1 Location Price Private Public Hardware RAID RAM RAM performance (oper./sec) RAM amount is more than specified in platform type Supplier Serial number Size according to the type IP address IP address Size Size Use switch System Edit properties of the selected server Add a new server Server type --Not set-- According to type Notes VPU network No information about configuration of this server. Please, run the diagnostics procedure. Warranty (months) If checked, operation of changing IPMI IP address will be started on the server Set up IPMI Please note!<br/>After you click OK, a temporary IP address will be added to the server together with VPU address. It will be used to change IPMI IP address to maintain connection. After operation is completed, the temporary address will be deleted and the server moved to VLAN from VPU network IP address '__value__' already in use. Server - '__server_name__' (__server_id__). You need to release the IP address for the selected server, or mark the IP "In use" in the pool 主机名 VLAN IP address should be assigned to VLAN to enable the AddIpVlanToPort option. When starting an operation, VLAN of the primary IP address will be set as dual-mode(native VLAN) of the server port, and VLAN of alias IP addresses will be added to trunk(tagged) A single IP address, a range of addresses in the format network_IP/network_mask, first_IP-last_IP. Begin a new line to specify any of these variants e.g.:<br/>192.168.56.1<br/>10.10.1.0/24<br/>10.10.2.4-10.10.2.10 Use VPU IP address for this server will be selected from the VPU network IP address will be allocated from the VPU network Private Public VPU network Port speed '__value__' Port speed '__value__' Port speed '__value__' Port speed '__value__' Port speed '__value__' This connection is marked as IPMI connection Server Delete the selected device Edit properties of the selected device Browse to the list of IPMI users Assign new device Turn off the selected ports Enable the selected ports Device connection failed The port is turned off The port is enabled The port's status is unknown Edit the port to which the server is assigned Executing the __value__ function... No equipment connected Cable is plugged in Unknown status MAC-addresses are not found on this port. Try to get actual information about MAC-addresses from the switch Hidden connection Edit the port corresponding to the selected connection rack Do you really want to turn off Do you really want enable IPMI users Off On Port 状态 Server devices Type IPMI PDU Switch IPMI password is too long. Connection to some IPMI with such a password may function incorrectly 完成后是否通知 如果需要完成系统安装或SSH可用时,请勾选此项 <a href="https://doc.ispsystem.com/index.php/Software_RAID" target="_blank">Software RAID</a> <a href="https://doc.ispsystem.com/index.php/Recovery_mode" target="_blank">Recovery mode</a> 格式化磁盘 Hardware RAID-controller is installed on this sever. Configuring software RAID may lead to errors and slow down hard drives HDDs (remain available/total): Select a software RAID that will be configured during OS deployment. Disks that are not used for creating RAID, can be used for other purposes (for example, you can use them to store backup copies). A list of available RAIDs depend on OS templates and number of similar disks installed successively on the server. 配置软件RAID Select an ISO-image for upload --no available ISO-images-- Upload from ISO-image You selected the "Network installation" template. When you see the VNC icon in the "Status" column, please go to the server to proceed with the installation.<br/>Access details: <br/> IP-address: primary IP address of the server <br/> Login: netinstall <br/> Password: see the "Password" field Execute the selected recipe (script) after OS installation 分区方式 集成软件环境 分区 Confirm password 格式化磁盘 诊断 完全格式化磁盘 Retype the password of the server administrator 当运行诊断时,服务器上的所有磁盘会被格式化。注意:需要诊断系统支持该项功能。 Select a diagnostics template you want to run on the server 服务器上的所有磁盘会被格式化,根据磁盘容量的大小和类型,可能会需要好几个小时。磁盘所有位置被0填满,并不仅是最前的512 bit位置填零。 Enter a hostname for the server Will be used for booting 请选择操作项 请选择服务器要安装的操作系统 Set a password of the server administrator Select a recovery template that you want to run on the server IP address <a href="http://en.5.ispdoc.com/index.php/Recovery_mode" target="_blank">Recovery mode</a> --no diagnostics templates available-- --Select operation-- --no OS templates available-- --no recover templates available-- 操作方式 操作系统 从现有的系统镜像中安装操作系统 设置密码 Upload the recovery template Upload the recovery template Upload the recovery template 服务器操作项 Do you really want to order KVM for the selected server? Order KVM for server IPMI connection Enable this checkbox if IPMI is located on this connection Information about IPMI Support of old types With this option, an old browser version will be used for noVNC proxy. It enables support of Java-plug-in which allows to display server console (relevant for IPMI HP iLo) IPMI MAC address. It can be received during diagnostics or server search IPMI MAC address <i>If proxy via ihttpd doesn't work properly for your IPMI, you may consider trying new module "IPMI proxy" (<a href="https://doc.ispsystem.com/index.php/IPMI_Proxy_v2" target="_blank">Documentation</a>)</i> Enable IPMI proxy via ihttpd If IPMI IP-address is behind NAT, you can allow proxying via ihttpd using the control panel IP address of the Intel AMT web-interface IP address Intel AMT version Protocol that is used to working with Intel AMT You will be redirected to this address when clicking the IPMI icon. If the URL is not provided, the IPMI IP address will be used Web-interface URL IPMI PDU Switch Device type Enter a device to which the server is connected Device type to which the server is connected Enter the protocol that is used for working with IPMI Enter the IP address Enter a password to access IPMI Enter a username to access IPMI Enter a port to which the server is connected With this check box selected, the device will not perform the following operations: server reboot, power on/off. Traffic statistics won't be collected also. IPMI version IP address Password User Port Hidden Edit properties of the selected device Connect a new device Server Label (name) of a server Intel AMT Select a protocol that will be used when working with Intel AMT Intel AMT version IPMI Device type Select a device type for which you want to register connection Select a protocol that will be used when working with IPMI IP address will be allocated automatically, login and password will be generated Select a UPS for which you want to register connection Select a switch for which you want to register connection IPMI version Automatic settings PDU Switch Select device Select a device port to which server is connected Select the check box not to use this connection for the server. Server statistics will not show traffic usage (or power consumption) for this port Port Hidden connection Select a device port This option allows to select an IP from the IP group rather then enter it for IPMI manually Allocate IP automatically IP address will be allocated from the selected network Connection method Select how you want a server owner to connect to the IPMI web-interface, when he clicks the corresponding icon in the server list Connection type Select how you want a server owner to connect to the IPMI web-interface, when he clicks the corresponding icon in the server list With this option, an old browser version will be used for noVNC proxy. It enables support of Java-plug-in which allows to display server console (relevant for IPMI HP iLo) Support old types IPMI IP address User Hidden Enable IPMI proxy via ihttpd If IPMI IP-address is behind NAT, you can allow proxying via ihttpd using the control panel With this check box selected, the device will not perform the following operations: server reboot, power on/off. Besides traffic statistics won't be collected. Enter a password to access IPMI You will be redirected to this address when clicking the IPMI icon. If the URL is not provided, the IPMI IP address will be used Web-interface URL Enter the IP address for this IPMI Enter a username to access IPMI Password IPMI settings 用户名 Delete the selected user Suspend the user account Edit Resume the selected user Add a new user This account is suspended This account is active This account is suspended This account is active Clicking the icon will redirect you to the user's servers Drill down to User panel User role User Operator Administrator Do you really want to suspend the selected user account Do you really want to enable the selected user 用户名 Servers Suspend Enable 状态 Users Number of VLAN Number of user VLAN available to this user Confirm password Select a user role that this user will have in DCImanager Enter a login that will be used to access DCImanager Enter a password to access DCImanager User role Administrator Operator User 用户名 密码 Edit properties of the selected user Create a new user account Users filters User role Administrator Operator User Username Please, save the switch configuration file You may not save the switch configuration file MAC-address on switch port This port has connections located in other racks Save the configuration file on the switch to non-volatile memory. If this option is not supported by switch or changes are saved into memory directly, not actions will be performed Save Save configuration files on the selected devices Connection problems Device type Delete the selected switch Edit properties of the selected switch View the log with switches Register a new switch Connected successfully Connection problems Data exchange error with __value__ device Failed to connect to __value__ Executing the __value__ function... Connected successfully List of ports through which you are managing Clicking the icon will redirect you to the list of servers connected to the selected switch Get the current status of the selected switch and its ports Get information from the selected devices Number of ports Log Ports Refresh Switch management Attention! When using an SNMP Common v2 and Huawei, be sure to execute the command on the switch to save IfIndex between re-initializations. The command for Cisco: snmp-server ifindex persist. Otherwise, the correspondence between servers and ports will be broken during re-initialization of the switch causing issues when collecting traffic statistics and enabling/disabling ports. Size in rack Select a type of the switch Space that this device occupies in the rack (in units) Enter the device IP address DCImanager won't handle this switch Full path to the file with switch log Enter the name for the device that will be used in DCImanager Enter additional information related to this switch Select a rack where this device is located Reserved Log file <a href="http://en.5.ispdoc.com/index.php/How_to_add_a_new_handler" target="_blank">How to add a new handler</a> <a href="http://en.5.ispdoc.com/index.php/How_to_add_a_new_handler" target="_blank">How to add a new handler</a> <a href="http://en.5.ispdoc.com/index.php/Juniper_(NETCONF)" target="_blank">Juniper (NETCONF)</a> 10.10.10.52 Register a new switch Dummy parameters This switch has only dummy ports. Please, enter the number of ports Number of dummy ports With authentication (MD5 and private key (DES) Basic Settings SNMPv3 security level Community for SNMP v1/v2c Password for SNMPv3 authentication SNMPv3 user Select an SNMP version Enter the password to access the device via SSH Enter the username to access the device via SSH Select how DCImanager will collect statistics, e.g. through netconf or SNMP Select how DCImanager will update the information on equipment statuses in the interface Enter the password to access the device via Telnet Enter the username to access the device via Telnet Note: reserved switch won't be processed in DCImanager and will be used only for recording <a href="http://en.5.ispdoc.com/index.php/SNMP_notifications" target="_blank">SNMP notifications</a> SNMP settings Community Password User Version SSH settings Password User Netconf SNMP Statistics Periodic polling SNMP-trap 状态 Telnet settings Password User Access Display the aggregated channels if you want to manage them in DCImanager Display aggregated channels Select a switch that will be the pair for the selected one. When you create VLAN on one switch, it will be created automatically on the other Double switch Not present Auto save configuration Every 5 minutes Every 30 minutes Disabled Every 15 minutes Save the switch configuration automatically if switch ports configuration have been changed Every 60 minutes Disable UpLink auto-detection Disable auto-detection of UpLink, if DCImanager detects port connection type incorrectly Unit number in the rack Unit number Change server rack With authentication (MD5 and private key (DES) Purchase information Basic Size in rack Change the rack for all the servers connected to this device Space that this device occupies in the rack (in units) Enter the device IP address DCImanager won't handle this switch Full path to the file with switch log Enter the device name that will be used in DCImanager Enter the supplier name Enter additional information related to this device Device price Enter the purchase date Select a rack where the device is installed Select a supplier Enter the serial number SNMPv3 security level Community for SNMP v1/v2c Password for SNMPv3 authentication SNMPv3 user Select an SNMP version Enter the password to access the device via SSH Enter the username to access the device via SSH Select how DCImanager will collect statistics, e.g. through netconf or SNMP Select how DCImanager will update the information on equipment statuses in the interface Enter the password to access the device via Telnet Enter the username to access the device via Telnet Warranty period in months Reserved Log file <a href="http://en.5.ispdoc.com/index.php/How_to_add_a_new_handler" target="_blank">How to add a new handler</a> <a href="http://en.5.ispdoc.com/index.php/How_to_add_a_new_handler" target="_blank">How to add a new handler</a> <a href="http://en.5.ispdoc.com/index.php/Juniper_(NETCONF)" target="_blank">Juniper (NETCONF)</a> --add new-- New supplier --without supplier-- Price Supplier Serial number SNMP settings Privileges Community Password User Version SSH settings Password User Netconf SNMP Statistics Periodic polling SNMP-trap 状态 Telnet settings Password User Edit properties of the selected switch Register a new switch Warranty (months) Edit port This interface is the aggregation of ports: __value__ MAC-address on switch port The server connected to the port is located in another rack Create aggregation The port is a member of the following aggregation: __value__. Configuration of this port cannot be modified manually. Remove aggregation Load Description Mode Auto Unmatched Full-duplex Half-duplex Unknown Port load for the last 5 minutes (prevailing type) Turn off the selected ports Enable the selected ports The port is turned off The port is enabled The port's status is unknown Executing the __value__ function... List of port's MAC addresses: __value__ No equipment connected Cable is plugged in Unknown status This is a reserved port Trunk mode Uplink Port load (packets/sec) for the last 5 minutes Get the current status of the device ports Identifier Do you really want to delete the selected port Do you really want to turn off the selected port Do you really want to enable the selected port Load (packet/sec) 主机名 Equipment name This is a reserved port Off On Refresh Port speed 100 Mbit 10 Gb 10 Mb 1 Gb Auto Auto 10/100 Mbit Unknown 状态 Switch ports UpLink VLAN If flagged, then the Primary Port selected will be added to the Primary VLAN as tagged. Otherwise, it will be added as untagged. Primary Port Isolated Secondary VLAN to which an editable port will be added A port, which will be added to the Primary VLAN and for which mapping from secondary VLAN will be performed Secondary VLAN Tagged primary mode Secondary PVLAN to which editable port mapping is done. Thus the editable port is a Promiscuous Port for this Secondary PVLAN. Tagged mode Mapped PVLAN If flagged, then the editable port will be added to the Secondary VLAN as tagged. Otherwise, it will be added as untagged. Primary VLAN This Primary VLAN will be created for the Secondary VLAN, if it is absent on the switch. A Primary Port will be added to it. Main parameters of a port Connect switch This port will be used for connecting other switch Switch to connect to Connection Main Connection to other switch Switch port used for connection Switch Port 40 Gbit 16 Gbit --Not set-- All VALNs Description Mode Auto Unmatched Full-duplex Half-duplex Port description (this information is collected from the device automatically) Select the port mode Port identifier (this information is collected from the device automatically) This port is running in Trunk mode List of active MAC-addresses on the switch port VLAN that won't be tagged on this port Enter additional information Select the port duplex This port is reserved for special needs. It is not displayed on the list of ports and is not used when searching for new servers Select the port speed VLANs that are included into Trunk Select the check box if this port is connected to a switch/router of a higher level, rather than to a server. This port won't display in the list of ports when connecting a new device. Server search won't be performed on this port. Any other operations cannot be performed on this port (change VLAN, speed, or mode) VLAN that is installed on the port Identifier Trunk mode List of MAC-addresses Native VLAN Reserved port Port speed 100 Mbit 10 Gb 10 Mb 1 Gb Auto Auto 10/100 Mbit Edit properties of the the selected switch port Register a switch port Trunk members UpLink VLAN This port has connections located in other racks Load (W) Connection problems Device type Delete the selected PDU Edit properties of the selected PDU Register a new PDU Connected successfully Connection problems Data exchange error with __value__ device Failed to connect to __value__ Executing the __value__ function... List of ports through which you are managing this pdu. Clicking the icon will redirect you to a list of servers connected to the selected power supply Get the current status of the selected pdu and its ports Get information from the selected devices Number of ports Ports Refresh Power Distribution Units (PDU) <a href="http://en.5.ispdoc.com/index.php/DCImanager:_Supported_equipment" target="_blank">Supported equipment</a> Size in rack Select a switch type/model Space that this device occupies in the rack (in units) Enter IP address of this device Enter the name for the device that will be used in DCImanager Enter additional information related to the UPS Select a rack where this device is located Register a new PDU Dummy parameters Number of dummy ports This switch has only dummy ports. Please, enter the number of ports Basic SNMPv3 security level Community for SNMP v1/v2c Password for SNMPv3 authentication SNMPv3 user Select an SNMP version Enter the password to access the device via SSH Enter the username to access the device via SSH Enter the password to access the device via Telnet Enter the username to access the device via Telnet SNMP settings Community Password User Version SSH settings Password User Telnet settings Password User Access <a href="http://en.5.ispdoc.com/index.php/DCImanager:_Supported_equipment" target="_blank">Supported equipment</a> Apply to servers With authentication (MD5 and private key (DES) Purchase information Basic Size in rack Change the rack for all the servers connected to this device Space that this device occupies in the rack (in units) Enter the device IP address Enter the device name that will be used in DCImanager Enter the supplier name Enter additional information related to this device Device price Enter the purchase date Select a rack where the device is installed Select a supplier Enter the serial number SNMPv3 security level Community for SNMP v1/v2c Password for SNMPv3 authentication SNMPv3 user Select an SNMP version Enter the password to access the device via SSH Enter the username to access the device via SSH Enter the password to access the device via Telnet Enter the username to access the device via Telnet Warranty period in months --add new-- New supplier --without supplier-- Price Supplier Serial number SNMP settings Privileges Community Password User Version SSH settings Password User Telnet settings Password User Edit properties of the selected PDU Register a new UPS Warranty (months) The server connected to the port is located in another rack Description Switch off the selected ports Enable the selected ports The port is turned off The port is enabled The port's status is unknown Executing the __value__ function... This is a reserved port Get the current status of the device ports Identifier Do you really want to delete the selected port Do you really want to turn off the selected port Do you really want to enable the selected port Load (W) 主机名 Server name Off On Refresh 状态 PDU ports Edit port Description Port description (this information is collected from the device automatically) Port identifier (this information is collected from the device automatically) Enter additional information related to the port This port is reserved for special needs. It is not displayed on the list of ports and is not used when searching for new servers Identifier Reserved port Edit properties of the selected PDU port Register a new PDU port Start date Cancel the selected operations Delete all non-active operations View log of the selected operation Do you really want to cancel the selected operations: Object Phase Cancel Clear Log 状态 Cancelled Completed Error In progress Operations Operation Log '__serverinfo__' will boot from the "__os__" ISO-image Install "__os__" on the __serverinfo__ server Search devices for new servers Run diagnostics for __serverinfo__ using the "__os__" template Install "__os__" on the __serverinfo__ server Restore the __serverinfo__ server using the "__os__" template Restore the __serverinfo__ server using the "__os__" template Restore the __serverinfo__ server using the "__os__" template Preparing ISO-image ISO-image has been successfully uploaded Starting upload of ISO-image Waiting for ISO-image upload to complete Upload in progress Local connection testing Collecting information about hardware RAID Measuring disk performance __param__ __param__ IPMI check in progress The operation was cancelled by the user The operation completed successfully "__param__" error The installation process has been started Completing the operaton Copy the files Completing installation Search new connections Preparing list of server for searching new connections Preparing installation scenario Restart services Search new connections to PDU Restore the operation Run the operation __param__ network connection is added for the __param__ server __param__ is connected to the __param__ server The __param__ server is selected for searching connections Server diagnostics completed successfully Completing diagnostics process IPMI configuration IPMI is not configured Preparing template diagnostics Quick hard drive erasing Measuring hard drives performance Collecting information about network interfaces Collecting information about hard drives Full hard drive erasing Diagnostics in progress Measuring CPU performance Collecting system information Server is uploading the diagnostics template Connections search completed Completing installation Preparing OS template Installation in progress Installation completed successfully OS installation completed successfully Completing OS installation Preparing OS template Installation in progress Server recovery completed Recovery template uploaded successfully Preparing recovery template SSH is accessible Recovery template upload in progress VNC is accessible Run server diagnostics Start installation Start installation Run recovery template Description Requester Responsible 状态 Tasks Task Install KVM on the __SERVER_ID__ server Service VLAN Owner 状态 Attention! This VLAN won't be available for configuration, as its type (Primary, Isolated, Simple), differs on all of the switches, and a number of ports are included into this VLAN. If its type doesn't match, but there are no ports in the VLAN, it will available for configuration Delete the selected virtual networks List of ports the selected VLAN is assigned to, and trunk ports for which this VLAN is a trunk-member. members all (as used by Juniper) won't be shown Networks on the selected VLAN VLAN Network VLAN members Networks VLAN Traffic statistics Traffic Incoming Traffic statistics Outgoing All IP addresses (in total) Traffic statistics Server Show statistics per IP address. This information is only available when using NetFlow/IPFIX __server__ server traffic Set filter by IP address Incoming Traffic usage statistics Outgoing Power consumption statistics Power consumption statistics Bandwidth Power, watt-hour Power consumption statistics Power consumption statistics Installation frequency (per day) Template installation average time OS OS installation (number of installations per day) OS templates stability (%) OS average installation time Successful With errors Stability (%) Time (min) OS templates usage statistics Power consumption statistics Server Power consumption by the __server__ server Power, watt-hour Power consumption statistics swtich found on port Do you really want to correct Do you really want to add Switch name and port Found on a foreign port Error MAC-address of this server is found on multiple switch ports No network connection No PDU devices are found MAC-address is not found The server MAC-address is found on a different port This port will be added to the server The server's port will be changed into the foreign one Go to the problem server Show detailed information about the server <a href="http://en.5.ispdoc.com/index.php/Automatic_correction_of_DCImanager_connections" target="_blank">Automatic correction of DCImanager connections</a> Switch port Add Fix To server Details Information on the server connections mismatches Date Traffic from all the switches Traffic statistics Traffic from all switches over the last 30 days Load Incoming (GiB) Total traffic Outgoing (GiB) Common server Common server Common server Copy Create a new type baed on the selected one Servers (available) Hard drive performance List of OS that are supported by all types Test the OS templates for the selected type List of processors that are included into this type Delete the selected server type Edit properties of the selected server type Clicking the icon will redirect you to a list of available servers of the selected type Hard drive performance Add new server type List of OS supported by this type Blade server Chassis for blade servers Common server Checking OS temolates for the selected type on the __value__ server RAM performance (oper./sec) Clicking the icon will redirect you to a list of servers of the selected type Do you really want to test OS templates for the following type(s) Do you really want to delete the selected type Supported OS RAM performance Servers All OS Test OS CPU Operating systems Server types Analyse SMART parameters Selected parameters of the SMART hard drives will be analyzed To test local speed, a 512 Mb file will be downloaded from the server running DCImanager to the server being tested. Actual speed less or greater by 20% than the value specified in the type, may indicate equipment issues. Local connection speed (Mib/s) Statistics collection Blade server Number of blades Platform type Number of cores CPU number CPU performance Maximum Minimum Add IPMI automatically Use NetFlow/IPFIX Number of hard drives Hard drive benchmark Maximum Minimum Hard drive size (Gb) Select how you want to collect statistics for server of this type Number of blades Select platform type Number of cores on the server including all the processors IPMI cannot be added automatically during diagnostics from servers of this type (the check box "Add IPMI automatically must be selected) The number of hard drives installed on the sever Performance of each hard drive on the server must be larger than that value. The size of each hard drive on the server must be larger than the specified value, but not larger than by 20% Enter the name, e.g. E3-1230-8G-2x1000SATA Enter additional information related to this type Hardware RAID is used on such servers The amount of RAM allocated to the server Performance of RAM allocated to the server must be larger than the specified value Size of the server of this type (in units) Network adapters benchmark Maximum Minimum When changing the type, all the servers that do not correspond to new settings, will be marked as "Have equipment problems" <a href="http://en.5.ispdoc.com/index.php/Server_types_in_DCImanager" target="_blank">Server types in DCImanager</a> Platform for blade servers Hardware RAID RAM RAM performance (oper./sec) Maximum Minimum Size in the rack Use switch Edit properties of the selected server type Add a new server type Common server Add the CPU into the list of CPU of this type. DCImanager uses this type while defining server type automatically Add List of processors Name Select a processor for this server type. New processors will be added into the list when running server diagnostics Add processor to this type Add processor to this type Add the operating system template into the list of OS templates available for the selected type Operating system Add OS List of OS supported by this type Select an OS template OS Add OS Operating system Add OS List of OS supported by all types OS Add OS Set/Remove Operations Scan servers Traffic statistics Panel administrator Help New server New user Spares Number of PDU Unallocated servers (without rack or unit number) Equipment information Number of switches Server information During OS deployment Active available servers Number of servers Available servers Under diagnostics Blocked servers New servers Information Parameter Information DHCP failed DHCP server down connected to server IPMI PDU switch UPS Connection with __devtype__ __device__ (__extra_message____devapi__) failed Device connection failed User notes VLAN creation reset port Identifier Spare parts World Wide Name (WWN) или World Wide Identifier (WWID) ) is a unique identifier used to identify a device Unit number WWN Suppliers Select the purchase date Unit number in the rack Serial number Supplier You can add equipment manually, or start the diagnostics process on the server. DCImanager will automatically add equipment that was found during diagnostics Name save configuration Template removed Select how many servers with maximum traffic will be displayed Top servers by traffic usage Date 服务器完整主机名 --without owner-- Unknown Owner 主机名 --unknown rack-- Name Device IP地址 Purchase date With authentication (MD5) without private key With authentication (MD5) and private key (DES) Data center MAC detected getting MAC-addresses mode configuration off on speed configuration getting SNMP notification VLAN setup in progress getting statistics getting information from device Without authentication 备注 机柜 服务器 Security level Private key phrase Spare types IPMI PDU switch UPS while exchanging data with __devtype__ __device__ (__devapi__) An error occurred while exchanging data with the device IPMI get a list of MAC-addresses PDU port module change port turn off enable port reset port port speed change statistics collection Switch __devtype__ __device__ (__devapi__) does not support __func__ This function is not supported by this device An error occurred while __opertype__ __serverinfo__ running server diagnostics (__template__) installing the __template__ operating system on the server uploading the __template__ recovery template on the server The operation failed No supplier found No warehouse found No HDD type found No RAM type found No PCI type found No CPU found No rack types available No platforms No spare parts types No spare parts categories No spare types categories No OS templates Cannot run operations on this server. The server is not connected to any PDU or IPMI To be able to create servers, you should first add and set up the pool of IP addresses. You can assign additional IP addresses to a newly created server. DCImanager will use them (primary and alias IP addresses) to configure the DHCP configuration file when starting operations on the server. For example, when deploying an operating system, the primary IP address will be assigned to the server through DHCP, once the installation is completed, it will be saved on the server network interface. All IP addresses should be allocated from the IP pool. Before creating a server, add a source of IP addresses. Learn more in our <a href="http://doc.ispsystem.com/index.php/IP_address_pool">Documentation</a> Switch log file is not specified No racks available No routers for synchronization found. VPU cannot work without routers VPU mode is not active Search Server connection search in progress Start server connection search Delete all the server connections to redefine new ones during the next search Reset Delete all server connections Search for server connection was not performed PDU connection not found Switch connection not found Search for server connection will run in __time__ minutes. Bring the selected servers into operation Devices connected to the selected server Delete the selected server Server configuration Automatic server search Hardware:<br>__value__ Switch port - off __value__ Switch port - on __value__ Switch port - unknown status __value__ PDU port - off __value__ PDU port - on __value__ Power port - unknown status __value__ Power off the selected server Power on the selected server Reboot the selected server MAC-address Do you want to bring the selected servers into operation Do you really want to delete the server <a href="http://en.5.ispdoc.com/index.php/DCImanager:Princiles_of_operation:_Server_search" target="_blank">Princiles of operation: Server search</a> <a href="http://en.5.ispdoc.com/index.php/Configuring_server_search" target="_blank">Configuring server search</a> Approve Connections Info Settings Off On Reboot Found servers Type VLAN Check RAM frequency during diagnostics. With this option enabled, during the diagnostics the system will consider the RAM module found even if only it size matches the size that the sever provided during diagnostics. Selecting this check box will compare frequency of every module Configure router If the check box is selected, the router will be configured automatically when creating a network in VLAN To create hardware RAID-array you will need HDD of the same size. Depending on manufacturer, disk size can differ by several dozens of megabytes. This parameter allows ignoring difference in size and creating RAID-array. Enter the permissible error (in %) in HDD size. Difference in hard drive size, % Create an operator in IPMI (user with limited permissions) automatically during server diagnostics and grant the server owner access with those credentials Do not change admin password during diagnostics Do not reset admin password Create user for owner Enter IP addresses of name servers that will be set up on the server after OS template. You can use IPv4 or IPv6. Leave the field blank if you do not want to create additional name servers. In this case the name servers that DCImanager uses, will be set up on the target server after OS template. Name servers Time in which server diagnostics will be stopped if not finished yet, in minutes Time in which server restoration will be stopped if not finished yet, in minutes Server diagnostics timeout Server restore timeout ISO boot timeout OS installation timeout Time in which OS installation will be stopped if not finished yet, in minutes Time in which ISO loading will be stopped if not finished yet, in minutes Enter the password to the server where the server search template was running Password Automatically mark IPMI connections as service connections If during diagnostics or server search the IPMI MAC address was identified, then server connection with this MAC address will be marked as service connection Cannot disable VPU. There are servers with enabled VPU. Delete the VPU address of the server __server_name__ (__value__) Pool of IP addresses to allocate Ips for IPMI Provide a pool of IP addresses to allocate Ips for IPMI Pool of IP addresses for IPMI Pool of IP addresses for IPMI IPMI Alias IP pool IP pool for VPU Free IP pool IP pool IP addresses will be allocated from this pool by default. You can modify these settings in the server configuration form Alias IP addresses will be allocated from this pool for servers with VPU This pool will be used when creating networks for VPU When releasing a server with VPU, an IP address will be allocated from this pool ISO-image size limit per user (Gb) unlimited An ISO-image won't be uploaded if its size exceeds the limit ISO-image lifetime for user default value - 4 When the limit is reached, a user won't be able to upload more images Upload custom ISO-images Check the box to allow users to upload custom ISO-images Number of ISO-images per user ISO-images Set a period in hours that will pass before a custom image will be deleted default value - 0 Server IP address Server IP address (interface) that will be used for server search Network mask for server search. It should include DCImanager IP address, IP range, and Gateway for the server search network Network gateway for server search Gateway Network mask Enable auto check Enable auto search Range of IP addresses that will be assigned to newly created servers. It must match the server search network Range of IP addresses Auto searсh template This template will be used for auto searching servers Select a recipe that will run after server deployment from OS template. This recipe will be executed even if it was not selected when starting the operation. A recipe is selected from all available recipes if its name and tag match the OS template tags Recipe Server can be connected to a switch or PDU from any rack Use different racks for equipment Region The selected time zone will be set in OS templates for new servers. Time zone Geographical location Local time Location Region corresponding to this time zone UTC/GMT IP addresses of the selected type will be allocated to servers if no IP address is specified in the "IP block" field on the server configuration form Standard type of IP addresses Alias IP type All servers Enable trap notifications VLAN ID range Enable VPU Add IPMI automatically Activate NetFlow/IPFIX --all interfaces-- ID AS Clear disks Clear disks when checking Fix connections automatically Interfaces DHCP settings Check before releasing Diagnostics template NetFlow interface NetFlow port Full hard drive erase Additional IP addresses of this type will be allocated by default for VPU-server DCImanager will get notifications (traps) and update equipment statuses based on the information from the trap. VLAN can be created only with VLAN ID from these ranges. Supported format: number-number comma separated. E.g. 102-105, 2000-2500 Enable the mode " Vlan per user". See Documentation for more info IPMI, if any, will be automatically added to server's connections and configured according to DCImanager settings. Password for the IPMI user named dcimgr will be changed. Disable this option if you don't want to define IPMI during server search. DCImanager will use traffic usage statistics using NetFlow/IPFIX ID of the stand alone system. It is used to configure Bird All your hard drives will be cleaned up while running diagnostics. Note: diagnostics templates must support this feature Server's hard drives will be cleared while checking (if the diagnostics system supports this behavior). DCImanager will try to automatically fix issues with servers' connections. MAC-addresses from switches will be used Add or delete the interface into the configuration file of the DHCP-service. The DHCP-service will be working based on these interfaces Automatically check servers after they become available Select a diagnostics template that will be used when releasing servers Select the interface to listen NetFlow/IPFIX Enter a port to listen NetFlow/IPFIX All your hard drives will be cleaned up while running diagnostics. This process may take several hours depending on your hard drives' size and speed. Note: diagnostics templates must support this feature Select a proxy-server (IPv4) for OS setup. Format: http://192.168.0.5:1528/ or http://[aaa::5]:1528/ Leave the field blank if you don't want to use a proxy-server Select a proxy-server (IPv6) for OS setup. Format: http://192.168.0.5:1528/ or http://[aaa::5]:1528/ Leave the field blank if you don't want to use a proxy-server Address of this type will be taken when a server with VPU is released Do not allocate networks with a smaller prefix NetFlow/IPFIX statistics collection policy IPv4 networks that should include aliases. You can enter a several networks space separated Network configuration and VLAN will be checked on this router All servers without owners and active services will be deactivated automatically Servers (with owners and free) will be automatically switched off upon check DCImanager will listen to this port for new notifications Specify the VLAN ID for switching the server port before or after the diagnostics When releasing a server, only IP addresses from the VPU-network will be deleted. If the configuration of IPMI address is required, the connection will be switched to the selected VLAN after diagnostics. If it's not required, the server port will be switched to the selected VLAN before performing the diagnostics. Sub-interfaces with broadcast IP of VPU networks will be created there Networks will contain IP addresses of this type only Proxy-server (IPv4) Proxy-server (IPv6) IP address type after release Minimum prefix length Note! With the VPU mode activated, DCImanager will automatically configure interfaces for every VPU server and specify them into the configuration file. We do not recommend that you manually delete such interfaces from the configuration file <a href="http://en.5.ispdoc.com/index.php/OS_templates:_technical_details" target="_blank">How to create OS template</a> <a href="http://en.5.ispdoc.com/index.php/Squid_settings" target="_blank">Squid settings</a> <a href="http://en.5.ispdoc.com/index.php/VPU_mode" target="_blank">Configuring VPU</a> <a href="https://doc.ispsystem.com/index.php/Squid" target="_blank">squid</a> NetFlow/IPFIX Use NetFlow/IPFIX for statistics collection Only selected servers OS templates Policy Provider network Router for synchronization Power off available servers automatically Search servers Power off servers after check SNMP Trap Global settings Global settings Select a port to receive notifications none Assign ID VLAN after release Add to VLAN before releasing VPU VPU network interface IP address type Can use the VLAN on his servers --Without owner-- Select a type of the virtual network PVLAN Check this box if VLAN needs to be set up as a Private VLAN PVLAN type VLAN identifier This VLAN cannot be created on the routers. Add or delete from the trunk port members Enter the name for the virtual network. It is used to configure network equipment Enter additional information about the virtual network Select a router port Select a router you want to check This router will be checked for the VLAN ID. The VLAN ID will be taken from the range 100-1001,1006-4074 VLAN Id Reserved <a href="http://en.5.ispdoc.com/index.php/VLAN" target="_blank">VLAN management</a> <a href="http://en.5.ispdoc.com/index.php/VLAN:_Quick_start" target="_blank">VLAN: Quick start</a> Port Router Edit properties of the selected VLAN Add a new virtual network VPU Specify the server Do not select server from the list. Enter the name manually Select a rack where the server, from which you want to move hard drives is located Select a server from which you want to move hard drives Enter the name for the server --no servers-- Server Select a server from which you want to transfer the hard drives Do not select server from the list. Enter the name manually Select a rack where the server to which you want to move hard drives, is located Select a server to which you want to move hard drives Enter the name for the server --no servers-- Select a server to which you want to transfer the hard drives Specify the server Rack Server Server After the operation is completed, the hard drives will be interchanged ATTENTION! You can enable the option 'Move hard drives' to keep track of disk movement in DCImanager. Selecting this option will interchange server hard drives. Move hard drives Once the operation is complete, servers' IP addresses will be interchanged Information about the server from which hard drives will be moved Information about the server to which hard drives will be moved ATTENTION! Once the operation is complete, servers' IP addresses will be interchanged, the source server will be released and marked "faulty". The owner of the target server will be change into the owner of the source server. Configuration of the main network port (VLAN, port speed) will be imported Transfer only IP addresses ATTENTION! Once the operation is complete, the servers' IP addresses will be interchanged. From server Confirm the transfer of hard drives Into server Barcode World Wide Name (WWN) или World Wide Identifier (WWID) ) is a unique identifier used to identify a device. You can enter several identifiers using any separator character: ' \t\n\r' Barcode Add WWN WWN Category List of available spares List of defective spares Select a spare category Delete information about the selected spares View history of the selected spare Add This spare is broken Replacement under warranty Plug in the spare Plug out the spare and put in storage Plug out the spare from the server or rack List of equipment suppliers Write off the selected spares Supplier Storage Do you really want to delete the selected spares Do you really want to plug out the selected spare and move it into warehouse Location Written off Storage Rack Serial number Server Warehouse Defective Category Add Plug in Plug out Plug out Suppliers Write off Spares Type Purchase information Category Select a category for this spare The selected spare is defective Enter the supplier name Enter additional information related to this spare Set the price for this spare Select the date when this spare was purchased Select a supplier of this spare Enter the serial number for this spare Select a spare type Enter the warranty period in months Defective --add new-- New supplier --without supplier-- --no types-- Price Supplier Serial number Edit the selected spares Add a new spare Type Warranty (months) Select a server Specify the server manually Select a rack where the "place" is located Select a server from which you want to plug out the spare Enter the name for the server Select a place from which you want to plug out the spare --no servers-- Server name Place Select a source Defective Purchase information Category Add a new spare The selected spare is defective Select a category for this spare Enter the supplier name Enter additional information about this spare Set the price for this spare Select the date when this spare was purchased Select a supplier of this spare Enter the serial number for this spare Select a spare you want to plug out Select a spare type Enter the warranty period in months This spare is sent to supplier for replacement --add new-- New supplier --without supplier-- --no types-- Price Supplier Serial number Spare Select a spare Type Warranty (months) Sent for replacement Spare parts filter Category Installed Available Serial number Written off 状态 Type Specify the server Type in the server name Additional information about this action Select a rack Select a server Enter the name for the server --no racks-- --no servers-- Server Install plug-in Types included into this category Do you really want to delete the selected category Category Rack Server Types Types in category Spare categories Category id Id of the category that will be used when generating the serial number for the spare Enter the name for the category Edit the spares category Add a spare category Model Type Spares types Barcode Enter a barcode that will be used to define a type of the newly created spare part Enter the name for the type Model Edit the spare type Create a spare type Serial number Available spare parts Category Rack Supplier Serial number Server From Supplier Warehouse Defective spares Type Warranty (EXPIRED) List of connections Information IPMI MAC-addresses pdu Server MAC-addresses switch Detailed information Traffic statistics Server average temperature Temperature (C) Server average temperature End date Server type Average price Deviation from the average price Number of servers Purchase servers Start date Purchased equipment Server Price Server type Purchased servers Connection settings Apply to servers With authentication (MD5 and private key (DES) Purchase information Basic Size in rack Change the rack for all the servers connected to this device Space that this device occupies in the rack (in units) Enter the device IP address Enter the device name that will be used in DCImanager Enter the supplier name Enter additional information related to this device Device price Enter the purchase date Select a rack where this device is installed Select a supplier Enter the serial number SNMPv3 security level Community for SNMP v1/v2c Password for SNMPv3 authentication SNMPv3 user Select the SNMP version Enter the password to access the device via SSH Enter the username to access the device via SSH Enter the password to access the device via Telnet Enter the username to access the device via Telnet Warranty period in months --add new-- New supplier --without supplier-- Price Supplier Serial number SNMP settings Privileges Community Password User Version SSH settings Password User Telnet settings Password User Edit properties of the selected UPS Register a UPS Warranty (months) Size in rack Select a type/model of the UPS Space that this device occupies in the rack (in units) Enter the device IP address Enter the name for the device that will be used in DCImanager Enter information related to the UPS Select a rack where this device is located Register a UPS Basic SNMPv3 security level Community for SNMP v1/v2c Password for SNMPv3 authentication SNMPv3 user Select the SNMP version SNMP settings Community Password User Version SSH settings Password User Telnet settings Password User Access The input voltage drops below 100 volt Battery time remaining (min) Connection problems Device type Battery charge time Delete the selected UPS Edit properties of the selected UPS UPS input power (W) Load on the uninterrupted power supply in % Add a new Uninterrupted Power Supply Connected successfully Connection problems with __value__ Data exchange error with __value__ device Failed to connect to __value__ Executing the __value__ function... UPS output power (Watt) Learn the current status of the UPS Power consumption (kW) Load (%) Get information from the selected devices Output power (kW) Ports Refresh UPS management Power consumption statistics Input power (kW) Power consumption in data center Output power (kW) Power consumption in data center Do you really want to delete the selected object? Delete object Edit Locate the rack on the map Locate the wall on the map Delete the selected object from the map. You can delete only walls. All other objects can be deleted from the corresponding modules Edit the selected objects Edit Locate the UPS on the map Height Left Save Top Width Add rack Add wall Edit Add UPS Available spaces in racks Temperature Data center map Equipment load UPS load Select a rack Add a rack to the map Select the check box to delete the wall Delete the selected wall Enter the wall length in mm Enter the wall width in mm Length (mm) Wall parameters Add the wall to the map Width (mm) Depth Enter device depth in mm Select a UPS that you want to locate Enter the device width in mm Add rack into the map UPS Width Do you really want to delete information about completed operations? Clear the list of operations Specify server manually Type in the server name Spare parts are in the server Enter the name of the supplier Select a supplier of spares Select a server for removing spare parts Select a source of spares Spares in the server --add new-- Supplier name --without supplier-- --no servers-- Supplier Server name Spares supplier Add/Move spares part: Select source Category Number Number of records New spare parts will be marked as defective Warranty in months This spare is broken --no types-- Add/Move spares: Spare properties Type Warranty Warranty Enter additional information List of serial numbers for new spares Notes Serial numbers Serial numbers are put Add/Move spare parts: Serial numbers Delete the selected supplier Edit properties of the selected supplier Create a new supplier Suppliers Action Action Add Move Write off Event date Information Get from supplier '__seller__' Plug out from the server '__from_server__' Move from the server '__from_server__' into '__to_server__' Move from the server '__from_server__' to warehouse Install into server '__to_server__' Write off spare: __reason__ Spare history User '__spare__' will be moved from the server '__server__' to warehouse Confirm transfer Destroyed Additional information about this action Select a reason for write off Lost Write off reason Sent to replacement Written off spares Enter the supplier name Edit properties of the selected supplier Add supplier __device__ <br/> status - __adm_status__ pdu __device__ : __portdescr__<br/> status - __adm_status__ switch__device__ : __portdescr__<br/> status - __adm_status__<br/> link - __oper_status__ unknown on off Connection Server name unknown cable connected cable not connected Network load (bit per second) Rack name Network load PDU ports usage Size usage (in units) Network ports usage Temperature Battery charge is enough for (minutes) Input power UPS name Output power Save Network load Battery charge is enough for (minutes) Input power Device load (%) Name of the UPS Output power Switch name Prevailing channel load in 5-minute sample Load Month Channel load per month (Burstable) Select a month in the format YYYY-MM to generate a report Channel load (Burstable) Burstable per month Server owner is allowed to enter IPMI under this user Updates user list according to IPMI users Id 状态 Update IPMI username Internal id Access level User Operator Administrator IPMI users Allow server owner to access IPMI Server owner will see username and password of the given user when navigating to IPMI icon Password Enter the user password. After changing the user password that IPMI uses to connect to the server in DCImanager, IPMI will stop responding for some time (1-2 minutes) IPMI username Enter the user id User role defines permissions for the newly created user Enter the name for the IPMI user Enter the user password. After changing the user password that IPMI uses to connect to the server in DCImanager, IPMI will stop responding for some time (1-2 minutes) Id User level Administrator Operator User Edit properties of the selected user Apply to servers With authentication (MD5 and private key (DES) Purchase information Basic Size in rack Change the rack for all the servers connected to this device Space that this device occupies in the rack (in units) Enter the device IP address Enter the device name that will be used in DCImanager Enter the supplier name Enter additional information related to this device Device price Enter the purchase date Rack where the device is installed Select a supplier Enter the serial number SNMPv3 security level Community for SNMP v1/v2c Password for SNMPv3 authentication SNMPv3 user Select the SNMP version Enter the password to access the device via SSH Enter the username to access the device via SSH Enter the password to access the device via Telnet Enter the username to access the device via Telnet Warranty period in months --add new-- New supplier --without supplier-- Price Supplier Serial number SNMP settings Privileges Community Password User Version SSH settings Password User Telnet settings Password User Edit properties of the selected device Register a UPS Warranty (months) Connect sensor Battery time remaining (min) Connection problems Device type Battery time remaining Delete the measuring device Edit properties of the UPS UPS power consumption (Watt) Load on the UPS in % Add a new UPS Connected successfully Connection problems with __value__ Data exchange error with __value__ device Failed to connect to __value__ Executing the __value__ function... UPS output power (Watt) Get the current status of the measuring device. Note: it may take up to some minutes to get the information depending on a measuring device type Browse to the list of device sensors Power consumption Load Get information from the selected devices Output power Ports Refresh Sensors Measuring equipment Basic SNMPv3 security level Community for SNMP v1/v2c Password for SNMPv3 authentication SNMPv3 user Select the SNMP version SNMP settings Community Password User Version SSH settings Password User Telnet settings Password User Access Size in rack Select a type/model of the measuring device Space that this device occupies in the rack (in units) Enter the device IP address Enter the device name that will be used in DCImanager Enter any information related to this measuring device Select a rack where this device is located Register a measuring device Connecet the selected sensor to the rack Discount the selected sensors. Information from from the disconnected sensors won't be processed Do you really want to disconnect the selected sensors Connect Disconnect Connected to Sensors of the measuring device Sensor type Humidity Temperature Value Link to the repository Enter the name for the repository Link No OS templates repositories found <a href="http://en.5.ispdoc.com/index.php/OS_template_management" target="_blank">OS templates</a> Repository http://master.download.ispsystem.com/OSTemplate/ ISPsystem Edit properties of the OS templates repository New OS templates repository Delete the selected repository Edit properties of the repository Add a new repository Link Repository OS templates repository Autoupdate Activate/disable autoupdate for the selected template. If the autoupdate is on, the system will check the template version once a day and update it, if needed If the restriction is on, only administrator can install this template Only for administrator Edit properties of the OS template Key name Public SSH key All the SSH keys that you add will be copied while installing the operating system. This function is supported only by some operating systems Key name Public SSH key SSH keys Select a repository Select an OS template you want to install Clicking the Finish icon will download and install the selected template. This procedure may take a long time An error occurred while installing the template Repository OS template OS template installation In this module you can specify public SSH keys that will be copies while installing the operating system. This function is supported only by some operating systems Key name SSH keys ISO-image template Date Lits of templates parameters Parameters Activate autoupdate for the selected template Activate autoupdate for the selected template Date when the OS template was added into repository Delete the selected templates Update the list of templates Install/Update the selected templates Autoupdate for the selected template is on Autoupdate for the selected template is on Error installing the template An error occurred while installing the template This template is not installed This template is installed This template is installed Template installation in progress Template installation in progress Update the control panel to __value__ or later to be able to install or update the template Only administrator can install this template Only administrator can install this template There is a newer version of the template in the repository Configure the list of repositories All users can use this template Only administrator can use this template Edit properties of the selected template Update the list of templates Local template Modify the autoupdate settings Disable autoupdate of the selected template Activate autoupdate Do you really want to install (reinstall) the OS template Restrict access for Allow access to this template Activate access restrictions to the selected template Template Source Local template No update Update Check Install Repositories Allow Deny Properties Update 状态 Compatibility OS templates management Type Diagnostics template OS template Recovery template Recovery template Search template Template parameters Value The value, which is sent to the OS deployment script OS template parameters Edit the value, which is sent to the OS deployment script Move IP address Address is dedicated to VLAN (__value__) Currently IPMI IP address is being changed on the server. This operation has been started when address from VPU network was given to the server for automatic IPMI setup. Temporary address given to this operation has domain 'temp.ipmi.ip.address' and will be deleted automatically after operation is completed. 主机名 Move the selected IP to another server Move IP Select racks to show data. The maximum number of racks that you can select - 15 Date Racks Temperature in data-center racks Temperature in data-center racks Temperature in degrees Temperature in data-center racks MAC-address on switch port Switches filter Device type Switch name Server Delivered Delivery date Enter the delivery time Enter the order name Enter additional information related to delivery and order status Price Select the purchase date Current delivery status Enter the number In transit Price 状态 Edit properties of the selected order Add a new order Number IPMI devices using IP addresses from this network Network is dedicated to IPMI IPMI Delete the network. This operation will also delete the IP addresses of this network assigned to servers Add a new network Network is not found on the router interfaces IP addresses from this network have invalid prefix in the routing table The network is set up on the router interface Servers to which IP addresses from this network are assigned Network Add Servers 状态 VLAN networks management <a href="http://en.5.ispdoc.com/index.php/DCImanager:_Supported_equipment" target="_blank">Supported equipment</a> Size in rack Select a router type/model Space that this device occupies in the rack (in units) Enter IP address of this device DCImanager won't process this router Enter the device name that will be used in DCImanager Enter additional information about this router Select a rack where this device is located Reserved 10.10.10.52 Register a new router Network for IPMI Use the IP group Type/pool of IP addresses used to dedicate a VPU network Select a type/pool of IP addresses used to dedicate a VPU network If checked, VPU network will be taken from the type/pool of IPMI addresses specified in VPU module settings (field "Type/Pool of IPMI IP addresses") Group of IP addresses "__net__" is allocated 10.10.10.0/24 Enter a network in the format 10.10.10.0/24 that can be used for VPU It specifies the number of addresses that this network will have Network prefix Add new network Connection problems Device type Delete the selected router Edit properties of the selected router List of device interfaces Add a new router Connected successfully Connection problems __value__ Data exchange error with __value__ device Failed to connect to __value__ Connected successfully List or router ports Get network addresses. Please note: this process may take a long time (up to several minutes) depending on equipment that you use Get information from the selected devices Interfaces Ports Refresh Routers Purchases filter Delivered Delivery date In transit 状态 Number Load Description Mode Auto Unmatched Full duplex Half-duplex Unknown Port load for the last five minutes (prevailing type) The port is off The port is on The port's status is unknown Interfaces No connection Cable is plugged in Unknown status This is a reserved port Uplink Port load (packet/sec) Identifier Load (packet/sec) This is a reserved port Interfaces 100 Mbit 10 Gbit 10 Mbit 1 gbit Auto Auto 10/100 Mbit Unknown 状态 Router ports UpLink IP address Server list Destination network __dest__ for this IP address has invalid prefix. The minimum prefix length: : __prefix_low_border__ An error occurred while trying to check the IP address in the routing table Delivery date Mark the selected orders as delivered Do you want to mark the equipment as delivered Price Deliver 状态 Amount Orders Number With authentication (MD5) and private key (DES) Common SNMPv3 security level Community for SNMP v1/v2c Password for SNMPv3 authentication SNMPv3 user Select the SNMP version Enter the password to access the device via SSH Enter the username to access the device via SSH Enter the password to access the device via Telnet Enter the username to access the device via Telnet Note: DCImanager won't process the reserved port, it will be used only for inventory count SNMP settings Community Password User Version SSH settings Password User Telnet settings Password User Access Interface Network address Device interfaces <a href="http://en.5.ispdoc.com/index.php/DCImanager:_Supported_equipment" target="_blank">Supported equipment</a> With authentication (MD5) and private key (DES) Order information Common Size in rack Space that this device occupies in the rack (in units) Enter the device IP address Enter the device name that will be used in DCImanager Enter the supplier name Enter additional information related to this device Device price Enter the purchase date Select a rack where this device is installed Select a supplier Enter the serial number SNMPv3 security level Community for SNMP v1/v2c Password for SNMPv3 authentication SNMPv3 user Select the SNMP version Enter the password to access the device via SSH Enter the username to access the device via SSH Enter the password to access the device via Telnet Enter the username to access the device via Telnet Warranty period in months --add new-- New supplier --without supplier-- Price Supplier Serial number SNMP settings Privileges Community Password User Version SSH settings Password User Telnet settings Password User Edit properties of the selected router Register a new router Warranty (months) An error occurred while reading the configuration file and (or) trying to apply new settings The Bird service could not apply new settings from the configuration file Could not find Bird in the system processes after the start command was executed Failed to start the Bird service An error occurred while working with SNMP Trap SNMP Trap service suspended Devices filter Device type UPS filter Device type PDU filter Device type Hidden If you check this box, the device won't take part in server restart, server power on/off. Traffic won't be collected Web-interface URL Clicking the IPMI icon will redirect to this URL. If you leave the field blank, IPMI IP address will be used Enable proxy via ihttpd If IPMI IP-address is behind NAT, you can allow proxying via ihttpd using the control panel Please note: IP address is taken from the ipmi type. This type should be created in IPmanager IP address will be allocated from the selected network IPMI user IP address type Create IPMI Switch log This port in enabled Disable the selected ports No connections This port is disabled This is a reserved port The port's status is unknown Cable is plugged in Executing the __value__ function... Enable the selected ports Unknown status Do you really want to enable the selected port On Port status Do you really want to turn off the selected port Off Device Edit the selected port Port identifier Port VLAN members Connections filter Error type MAC-address of this server is found on multiple switch ports No network connection No devices connected MAC-address is not found The server MAC-address is found on a different port 1. Click in the Username field inside the IPMI web-interface<br>2. Click "Login" button<br>3. Click in the Password field<br>4. Click "Password"<br>5. Click "login" button or "Enter" key on the keyboard.<br>You can switch between windows inside noVNC by pressing <b>Shift+Tab</b> hotkey<br>Link to the full tutorial with video-guides and screenshots can be found in the top right corner Interface hints Tutorial https://doc.ispsystem.com/index.php/How_to_work_in_IPMI_web-interfaces